Instruments
Showing 121–135 of 174 results
-
- Supplied as five plate set (zero plate and four coated thickness plates) mounted in a protective bound folder
- Provides a hard wearing, benchmark reference standard to compare instrument readings against
- Accuracy ±1%
- Coated plates supplied: 0 to 500 micron range
- Other size range thickness plates available to order
- Coated standards will wear over time and should be annually checked and certified
-
ING319T
- Integrated magnets allow remote data monitoring on steel substrates
- Dustproof and waterproof gage with fully sealed sensors (IP66 equivalent)
- Visual and audible indication of user defined limits against any/all parameters
- Manual and interval data logging in one hand-held dew point meter
- Large, customer definable illuminated display operates over the full temperature range
ING319T- Integrated magnets allow remote data monitoring on steel substrates
- Dustproof and waterproof gage with fully sealed sensors (IP66 equivalent)
- Visual and audible indication of user defined limits against any/all parameters
- Manual and interval data logging in one hand-held dew point meter
- Large, customer definable illuminated display operates over the full temperature range
-
- Magnetic base clings to steel surfaces
- Allow 30 minutes stabilization time prior to reading
- No batteries required
- Optional pre-delivery Test Certificate - order separately
- Accuracy ± 3°C when stabilized
-
INDHHDWAND
- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
INDHHDWAND- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
-
INDPT20KBlastOne Holiday Tester for detecting pinholes and flaws in coatings on conductive substrates.
Enquire about other models for 6Kv and 30Kv
Accessories also available
Calibration Certificate is an optional extra.INDPT20KBlastOne Holiday Tester for detecting pinholes and flaws in coatings on conductive substrates.
Enquire about other models for 6Kv and 30Kv
Accessories also available
Calibration Certificate is an optional extra. -
IND2664C
Elcometer 266 holiday detector is used to test porosity on thick coatings up to 7.5mm (300 mils) thickness.
It's ideal for inspecting coatings on pipelines and other protective coatings.
This holiday tester features a selectable voltage calculator to determine and set the correct test voltage based upon 1. the test standard and 2. the thickness of the coating being tested.
Order handle separatelyIND2664CElcometer 266 holiday detector is used to test porosity on thick coatings up to 7.5mm (300 mils) thickness.
It's ideal for inspecting coatings on pipelines and other protective coatings.
This holiday tester features a selectable voltage calculator to determine and set the correct test voltage based upon 1. the test standard and 2. the thickness of the coating being tested.
Order handle separately -
GCHECKKITFNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITFNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
-
INDLPDKITCAVAILABLE FOR RENTAL OR PURCHASE
- Wet sponge spark tester for metal and concrete substrates
- Test coatings up to 20 mil
- Has visual reassurance that the instrument is properly grounded
- Calibration Certificate shows traceability to NIST (Long Form) Included
- Two Year Warranty
- Conforms to ISO 14654, ISO8289-A, ASTM G62, G6, D5162, BS7792-2, NACE TM0384, SP0188, AS3894.2, JIS K 6766
- Complete Kit Includes: All the contents from the Basic Kit, As well as: Roller Sponge, Internal Diameter Sponge, additional 8" x 8" Sheet sponge for custom jobs, Wetting Agent, Extension rods for an additional 2' of reach, universal adapters to extend existing paint rollers and poles, 40' of ground wire, 15' of hot wire, and magnetic grounding post
INDLPDKITCAVAILABLE FOR RENTAL OR PURCHASE- Wet sponge spark tester for metal and concrete substrates
- Test coatings up to 20 mil
- Has visual reassurance that the instrument is properly grounded
- Calibration Certificate shows traceability to NIST (Long Form) Included
- Two Year Warranty
- Conforms to ISO 14654, ISO8289-A, ASTM G62, G6, D5162, BS7792-2, NACE TM0384, SP0188, AS3894.2, JIS K 6766
- Complete Kit Includes: All the contents from the Basic Kit, As well as: Roller Sponge, Internal Diameter Sponge, additional 8" x 8" Sheet sponge for custom jobs, Wetting Agent, Extension rods for an additional 2' of reach, universal adapters to extend existing paint rollers and poles, 40' of ground wire, 15' of hot wire, and magnetic grounding post
-
IND0606BlastOne PCWI Porosity Detector Holiday Detector Kit. 2 Models available. Recommended for all coating services, chlorinated rubber and on very thick coatings Compact pinhole detector design with display showing LED voltage The Holiday Detector comes with clip-on battery and storage case When the porosity detector, detects porosity there is a audible and visual alarm Available in two fully adjustable ranges of voltage - pulse type: 0-15 kV 0-30 kV Options including fan & flat brushes.IND0606BlastOne PCWI Porosity Detector Holiday Detector Kit. 2 Models available. Recommended for all coating services, chlorinated rubber and on very thick coatings Compact pinhole detector design with display showing LED voltage The Holiday Detector comes with clip-on battery and storage case When the porosity detector, detects porosity there is a audible and visual alarm Available in two fully adjustable ranges of voltage - pulse type: 0-15 kV 0-30 kV Options including fan & flat brushes.
-
INE134CSN
- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
INE134CSN- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
-
IND280SKIT
- Ideal for testing clean, damp, dirty or slightly conductive coatings
- Flashing display, LED and adjustable volume alarm indicates holiday identification
- 0.5 - 35kV range for detecting porosity in coatings up to 25mm thick
- Ergonomic safety trigger inside handle cuts power upon release
- Durable, shock- and water-resistant design ensures long life
- Shoulder strap allows for continuous use
- Can be used in accordance with AS 3894.1, ANSI/AWWA C203, ANSI/AWWA C214, ASTM D4787, ASTM D5162, ISO 29601, JIS G 3491, JIS G 3492, NACE RP0274, NACE SP0188, NACE SP0490, NACE TM0186, NACE TM0384
IND280SKIT- Ideal for testing clean, damp, dirty or slightly conductive coatings
- Flashing display, LED and adjustable volume alarm indicates holiday identification
- 0.5 - 35kV range for detecting porosity in coatings up to 25mm thick
- Ergonomic safety trigger inside handle cuts power upon release
- Durable, shock- and water-resistant design ensures long life
- Shoulder strap allows for continuous use
- Can be used in accordance with AS 3894.1, ANSI/AWWA C203, ANSI/AWWA C214, ASTM D4787, ASTM D5162, ISO 29601, JIS G 3491, JIS G 3492, NACE RP0274, NACE SP0188, NACE SP0490, NACE TM0186, NACE TM0384
-
INF1061
- Destructive pull-off adhesion test
- Applications include paint or plasma spray on bridge decking, coatings on steel, aluminum, concrete, etc.
- Uses standard test dolly
- Used in accordance with ISO4624, AS1580-408-5 Standards
- Kit supplied with unit body, base support ring, 20 dollies, pack of Araldite adhesive, magnetic dolly clamp, dolly cutter, instructions, carry case
INF1061- Destructive pull-off adhesion test
- Applications include paint or plasma spray on bridge decking, coatings on steel, aluminum, concrete, etc.
- Uses standard test dolly
- Used in accordance with ISO4624, AS1580-408-5 Standards
- Kit supplied with unit body, base support ring, 20 dollies, pack of Araldite adhesive, magnetic dolly clamp, dolly cutter, instructions, carry case
-
BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy access to ordering, operational manuals, etc.
These flat wire brushes are the electrodes suited for PosiTest HHD high voltage holiday detection on flat surfaces. Additional information is as follows:
- Multiple sizes available between 2 - 48" wide (51 to 1219 mm)
- Flat wire brushes do not require couplers or spring connectors like the rolling spring electrodes do. Each brush is supplied ready-to-use.
- Sold individually.
-
GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
-
INDSMLINK
- Turns your cell phone or tablet into a virtual PosiTector gauge
- Accepts coating thickness, environmental and surface profile probes
- No internet connection required for mobile integration
- Kit includes holster with belt clip, wrist strap, PosiTector app, batteries
- Probes purchased separately
INDSMLINK- Turns your cell phone or tablet into a virtual PosiTector gauge
- Accepts coating thickness, environmental and surface profile probes
- No internet connection required for mobile integration
- Kit includes holster with belt clip, wrist strap, PosiTector app, batteries
- Probes purchased separately