Instruments
Showing 91–105 of 174 results
-
INDRTRPUTTYRecommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate. This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive. One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.INDRTRPUTTYRecommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate. This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive. One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.
-
INDCMMEXT
The Telescopic Extender is designed to enhance ease and efficiency. This lightweight device allows for ergonomic moisture measurements on large surfaces without the discomfort of bending or kneeling.
- Lightweight, ergonomic design for comfortable use.
- Length: 47 cm (collapsed) and up to 124 cm (extended)
- Secure ¼”-20 threaded mounting point for easy attachment.
- Optimized for use with the PosiTest® CMM Concrete Moisture Meter.
- Ideal for quick, large surface moisture evaluations.
INDCMMEXTThe Telescopic Extender is designed to enhance ease and efficiency. This lightweight device allows for ergonomic moisture measurements on large surfaces without the discomfort of bending or kneeling.
- Lightweight, ergonomic design for comfortable use.
- Length: 47 cm (collapsed) and up to 124 cm (extended)
- Secure ¼”-20 threaded mounting point for easy attachment.
- Optimized for use with the PosiTest® CMM Concrete Moisture Meter.
- Ideal for quick, large surface moisture evaluations.
-
DeFelsko oven temperature probes for use with their OTL system: Extend the reach of the logger with the wide selection of probes as follows:
- Applications. Available in both Surface and Air types.
- Mountings. Available in Magnetic, Clamp, and Washer mounts.
- Lengths. Stainless braided cables commonly stocked in 3 lengths, and custom lengths available by special order.
-
INE142K
- Dust Tape Test Kit to measure surface dust
- Used in accordance with Standards ISO 8502-3
- Comes with a Sturdy Binder to hold all forms, visual comparator, tape, scissors, and illuminated magnifier
- 10X Illuminated Magnifier
INE142K- Dust Tape Test Kit to measure surface dust
- Used in accordance with Standards ISO 8502-3
- Comes with a Sturdy Binder to hold all forms, visual comparator, tape, scissors, and illuminated magnifier
- 10X Illuminated Magnifier
-
INT266200334CDiscover the Elcometer 266 DC Holiday Detector Handle, your ultimate companion for efficient and reliable coating inspection. Operating within a voltage range of 0.5 to 30kV, this continuous voltage handle is engineered for extensive and uninterrupted use. Its innovative design eliminates the need for constant hand contact, facilitating seamless operation over large areas.
- Operates within 0.5 to 30kV voltage range for broad application scope.
- Continuous voltage delivery for extensive use without fatigue.
- No constant hand contact required, enhancing user convenience.
INT266200334CDiscover the Elcometer 266 DC Holiday Detector Handle, your ultimate companion for efficient and reliable coating inspection. Operating within a voltage range of 0.5 to 30kV, this continuous voltage handle is engineered for extensive and uninterrupted use. Its innovative design eliminates the need for constant hand contact, facilitating seamless operation over large areas.- Operates within 0.5 to 30kV voltage range for broad application scope.
- Continuous voltage delivery for extensive use without fatigue.
- No constant hand contact required, enhancing user convenience.
-
INDSSTSWAB
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units.
MPN: SSTSWAB
INDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units.
MPN: SSTSWAB
-
-
IND6000PFR
- Ideal for use on thin, soft coatings
- Pack includes 2 nylon foot rings, instruction card and clear plastic case
- Compatible with all PosiTector 6000 regular separate probes (FS, FTS, NS, NAS, FNS)
- Manufacturer part # PRBFOOTKIT-D
IND6000PFR- Ideal for use on thin, soft coatings
- Pack includes 2 nylon foot rings, instruction card and clear plastic case
- Compatible with all PosiTector 6000 regular separate probes (FS, FTS, NS, NAS, FNS)
- Manufacturer part # PRBFOOTKIT-D
-
-
-
INDDPMLLOCK
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7. This Kensington lock provides security, helping to ensure that the valuable instrument remains secure.
MPN: DPMLLOCK
INDDPMLLOCKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7. This Kensington lock provides security, helping to ensure that the valuable instrument remains secure.
MPN: DPMLLOCK
-
INDCMMISTOOL3PK
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
Replacement Probe Extraction Tools for Positector® CMM IS measuring probes come in packs of 3.
The use of this tool helps facilitate the removal of the probe when testing is complete.
MPN: CMMISTOOL3PK
INDCMMISTOOL3PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment.
Replacement Probe Extraction Tools for Positector® CMM IS measuring probes come in packs of 3.
The use of this tool helps facilitate the removal of the probe when testing is complete.
MPN: CMMISTOOL3PK
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
The PosiTector® DPMS version (only) in the Dew Point Meter family of probes has the unique capability of accepting these two optional accessories, which are:
- PRBDPMHSP, Hand-Held Surface Temperature Probe, for spot checking hard-to-reach surfaces
- PRBDPMLTP, Liquid Temperature Probe, for checking the temperature of paint and other industrial liquids