Instruments
Showing 136–150 of 174 results
-
INDPRBEXT
- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
INDPRBEXT- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
-
INDSPG
- Probe only
- Probe for measuring surface profiles on blasted steel
- Fits standard and advanced PosiTector body
- 30° tip for conformance to Australian standard AS 3894.5-C
INDSPG- Probe only
- Probe for measuring surface profiles on blasted steel
- Fits standard and advanced PosiTector body
- 30° tip for conformance to Australian standard AS 3894.5-C
-
INDSPGS
- Probe only
- Suits standard and advanced PosiTector® SPG gauge body
- For measuring surface profile for blasted steel, textured coatings and concrete
- For use in extended reach measuring
- Surface profile gauges utilize a digital depth micrometer to measure and record peak to valley surface profile heights in preparation for the application of coatings
INDSPGS- Probe only
- Suits standard and advanced PosiTector® SPG gauge body
- For measuring surface profile for blasted steel, textured coatings and concrete
- For use in extended reach measuring
- Surface profile gauges utilize a digital depth micrometer to measure and record peak to valley surface profile heights in preparation for the application of coatings
-
INDSPGOS
- Probe only
- Probe for measuring convex surface profiles on blasted steel
- Fits standard and advanced PosiTector body
- 30° tip for conformance to Australian standard AS 3894.5-C
INDSPGOS- Probe only
- Probe for measuring convex surface profiles on blasted steel
- Fits standard and advanced PosiTector body
- 30° tip for conformance to Australian standard AS 3894.5-C
-
INA456CFNFTS
The 456 Elcometer Gauge | Body Only
- Measure Dry Film Thickness (DFT) on ferrous and non-ferrous substrates
- Memory can hold upto 50,000 readings in 999 batches
- The Elcometer 456 will take 60+ readings per minute
- Comes complete with calibration foils, batteries, hard cover case
- DFT measurements comply with standards ISO2178, ISO2360, ISO2808-6A, ISO2808-6B, AS3894-3 Standards
INA456CFNFTSThe 456 Elcometer Gauge | Body Only
- Measure Dry Film Thickness (DFT) on ferrous and non-ferrous substrates
- Memory can hold upto 50,000 readings in 999 batches
- The Elcometer 456 will take 60+ readings per minute
- Comes complete with calibration foils, batteries, hard cover case
- DFT measurements comply with standards ISO2178, ISO2360, ISO2808-6A, ISO2808-6B, AS3894-3 Standards
-
INT456CF1S
- Accuracy: 1500 micron
- Compatible: New 457
- For ferrous gauges
INT456CF1S- Accuracy: 1500 micron
- Compatible: New 457
- For ferrous gauges
-
INT456CFNF1S
- For ferrous and nonferrous gauges
- Designed for precise measurements of coating thickness
- Compatible with both ferrous and nonferrous gauges
- Specifically designed for use with the DeFelsko Positector coating thickness gauge
- Offers a measurement range from 0 - 1500 microns
- High accuracy of 1500 microns ensures reliable readings
- Seamless integration with the new 456 gauge
INT456CFNF1S- For ferrous and nonferrous gauges
- Designed for precise measurements of coating thickness
- Compatible with both ferrous and nonferrous gauges
- Specifically designed for use with the DeFelsko Positector coating thickness gauge
- Offers a measurement range from 0 - 1500 microns
- High accuracy of 1500 microns ensures reliable readings
- Seamless integration with the new 456 gauge
-
APCMG00
- Gas for Calibrating CO Carbon Monoxide Monitors
- 0ppm Control Zero Gas
- Comes in RPB Calibration Kit for GX4, but can be used for calibrating other Brands of CO Monitors
- HAZMAT Shipping - can not ship airfreight, must go Road Freight Shipping
- Sold Individually
APCMG00- Gas for Calibrating CO Carbon Monoxide Monitors
- 0ppm Control Zero Gas
- Comes in RPB Calibration Kit for GX4, but can be used for calibrating other Brands of CO Monitors
- HAZMAT Shipping - can not ship airfreight, must go Road Freight Shipping
- Sold Individually
-
INE1341
- Pack of 5 test kits
- Surface salt extraction efficiency up to 98%
- Measurement range 5 ppm to 200 ppm
- Used in accordance with ISO 8502-5, ISO 8502-6, ISO 8502-15 and AS 1627-4 Standards
INE1341- Pack of 5 test kits
- Surface salt extraction efficiency up to 98%
- Measurement range 5 ppm to 200 ppm
- Used in accordance with ISO 8502-5, ISO 8502-6, ISO 8502-15 and AS 1627-4 Standards
-
INE1342
- Supplied in a pack of 4 test kits
- Abrasive Chloride measurement range 1 ppm to 50 ppm
- Compact, portable, two minute field test
- Safe handling - no needles or syringes
INE1342- Supplied in a pack of 4 test kits
- Abrasive Chloride measurement range 1 ppm to 50 ppm
- Compact, portable, two minute field test
- Safe handling - no needles or syringes
-
INE134RKIT50
- Chloride, sulphate, nitrate Ion Surface contamination Analysis test kit Replacement components
- Pack: 50 Test
- Type: Box
- Shelf life: 18-24 months
INE134RKIT50- Chloride, sulphate, nitrate Ion Surface contamination Analysis test kit Replacement components
- Pack: 50 Test
- Type: Box
- Shelf life: 18-24 months
-
INE134RKIT
- Refill kit for CSN Test Kit
- Used to measure surface contamination from Chlorides, Sulphates and Nitrates
- Comes in a Pack of 5 Tests
- Genuine Parts - Manufactured by ChlorRid
INE134RKIT- Refill kit for CSN Test Kit
- Used to measure surface contamination from Chlorides, Sulphates and Nitrates
- Comes in a Pack of 5 Tests
- Genuine Parts - Manufactured by ChlorRid
-
INB115ALC
- Custom logo on Wet Film Thickness Gauge
- Re-usable aluminum gauge
- Measure wet film 25 to 2032 micron
- Come in pack 10
INB115ALC- Custom logo on Wet Film Thickness Gauge
- Re-usable aluminum gauge
- Measure wet film 25 to 2032 micron
- Come in pack 10
-
INDSPGTS
- Ideal measurement tool for surface profile of concrete created by blasting, scarifying, grinding, etching, etc.
- Cabled probe only
- Accuracy: ± (76 µ + 1 %) / ± (3 mils + 1%)
- Range: 0 - 6mm / 0 - 250mils
- Tip Angle: 60 degree
- Tip Radius: 500 µm (20 mils)
- Conforms to ASTM D8271
- PosiTector body sold separately
INDSPGTS- Ideal measurement tool for surface profile of concrete created by blasting, scarifying, grinding, etching, etc.
- Cabled probe only
- Accuracy: ± (76 µ + 1 %) / ± (3 mils + 1%)
- Range: 0 - 6mm / 0 - 250mils
- Tip Angle: 60 degree
- Tip Radius: 500 µm (20 mils)
- Conforms to ASTM D8271
- PosiTector body sold separately
-
INDLPDKITB
- Wet sponge spark tester
- Test coatings up to 12 mil (300 micron) for pinholes or holidays
- Used in accordance with AS 3894-2 Standard for coatings less than 10 mil (250 micron) thick (AS 3894.2-2002, Site testing of protective coatings, Method 2: Non-conductive coatings — Continuity testing — Wet sponge method)
- Audible pinhole-detection alarm
- Powered by three AA batteries
- Holiday detector Kit includes detector probe unit, earth lead with alligator clip and instructions
INDLPDKITB- Wet sponge spark tester
- Test coatings up to 12 mil (300 micron) for pinholes or holidays
- Used in accordance with AS 3894-2 Standard for coatings less than 10 mil (250 micron) thick (AS 3894.2-2002, Site testing of protective coatings, Method 2: Non-conductive coatings — Continuity testing — Wet sponge method)
- Audible pinhole-detection alarm
- Powered by three AA batteries
- Holiday detector Kit includes detector probe unit, earth lead with alligator clip and instructions