Inspection Kits
Showing 16–29 of 29 results
-
-
The PosiTest® HHD - DeFelsko's solution for detection of holidays, porosity, pinholes, leaks and other discontinuities in coatings and linings that are more than 10 mils (250 microns) thick.
- Advanced pulse or continuous DC technology
- Lightweight and ergonomic design
- Auto voltage calculator based on coating thickness
- Multiple electrode options with custom availability
- Long Form Certificate of Calibration included
- PosiTest HHD Kit (2 versions)
- Stick-type with Pulsed DC Output
- 72 Wh Li-ion battery pack with built-in charge indicator
- Durable Pelican Storm Case
- 20" Electrode Rod (or substitute 5" Electrode, with suffix -S after the part number)
- Shoulder Strap
- 25' earthing cable and smart charger with universal AC voltage input
- PosiTest HHD Basic Kit (same as above HHD kit except for the following)
- 36 Wh Li-ion battery pack instead of 72 Wh
- Hard Shell Case instead of Pelican Case
- 5" Electrode Rod
- (Note - the above HHD instruments can be converted to wand configurations, aiding in testing hard-to-reach areas, by adding the optional HHDWAND Handheld Wand.)
- PosiTest HHD C Kit
- Wand-type with Continuous DC Output
- 18650 Li-ion Batteries (4)
- Hard Shell Case
- Extension rod is not required, but available
- Rolling Spring Electrodes, and Conductive Paddle to aid in precise location of holidays
- Flat Wire Brush Electrodes
- Half-Circle Brush Electrodes
- Electrode Adaptors, makes other brands of electrodes compatible with the HHD
- Electrode Rods (for HHD) and Extension Rod (for HHD C)
-
GCHECKKITFNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITFNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
-
INDLPDKITCAVAILABLE FOR RENTAL OR PURCHASE
- Wet sponge spark tester for metal and concrete substrates
- Test coatings up to 20 mil
- Has visual reassurance that the instrument is properly grounded
- Calibration Certificate shows traceability to NIST (Long Form) Included
- Two Year Warranty
- Conforms to ISO 14654, ISO8289-A, ASTM G62, G6, D5162, BS7792-2, NACE TM0384, SP0188, AS3894.2, JIS K 6766
- Complete Kit Includes: All the contents from the Basic Kit, As well as: Roller Sponge, Internal Diameter Sponge, additional 8" x 8" Sheet sponge for custom jobs, Wetting Agent, Extension rods for an additional 2' of reach, universal adapters to extend existing paint rollers and poles, 40' of ground wire, 15' of hot wire, and magnetic grounding post
INDLPDKITCAVAILABLE FOR RENTAL OR PURCHASE- Wet sponge spark tester for metal and concrete substrates
- Test coatings up to 20 mil
- Has visual reassurance that the instrument is properly grounded
- Calibration Certificate shows traceability to NIST (Long Form) Included
- Two Year Warranty
- Conforms to ISO 14654, ISO8289-A, ASTM G62, G6, D5162, BS7792-2, NACE TM0384, SP0188, AS3894.2, JIS K 6766
- Complete Kit Includes: All the contents from the Basic Kit, As well as: Roller Sponge, Internal Diameter Sponge, additional 8" x 8" Sheet sponge for custom jobs, Wetting Agent, Extension rods for an additional 2' of reach, universal adapters to extend existing paint rollers and poles, 40' of ground wire, 15' of hot wire, and magnetic grounding post
-
INE134CSN
- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
INE134CSN- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
-
IND280SKIT
- Ideal for testing clean, damp, dirty or slightly conductive coatings
- Flashing display, LED and adjustable volume alarm indicates holiday identification
- 0.5 - 35kV range for detecting porosity in coatings up to 25mm thick
- Ergonomic safety trigger inside handle cuts power upon release
- Durable, shock- and water-resistant design ensures long life
- Shoulder strap allows for continuous use
- Can be used in accordance with AS 3894.1, ANSI/AWWA C203, ANSI/AWWA C214, ASTM D4787, ASTM D5162, ISO 29601, JIS G 3491, JIS G 3492, NACE RP0274, NACE SP0188, NACE SP0490, NACE TM0186, NACE TM0384
IND280SKIT- Ideal for testing clean, damp, dirty or slightly conductive coatings
- Flashing display, LED and adjustable volume alarm indicates holiday identification
- 0.5 - 35kV range for detecting porosity in coatings up to 25mm thick
- Ergonomic safety trigger inside handle cuts power upon release
- Durable, shock- and water-resistant design ensures long life
- Shoulder strap allows for continuous use
- Can be used in accordance with AS 3894.1, ANSI/AWWA C203, ANSI/AWWA C214, ASTM D4787, ASTM D5162, ISO 29601, JIS G 3491, JIS G 3492, NACE RP0274, NACE SP0188, NACE SP0490, NACE TM0186, NACE TM0384
-
GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
-
INDPRBEXT
- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
INDPRBEXT- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
-
INDLPDKITB
- Wet sponge spark tester
- Test coatings up to 12 mil (300 micron) for pinholes or holidays
- Used in accordance with AS 3894-2 Standard for coatings less than 10 mil (250 micron) thick (AS 3894.2-2002, Site testing of protective coatings, Method 2: Non-conductive coatings — Continuity testing — Wet sponge method)
- Audible pinhole-detection alarm
- Powered by three AA batteries
- Holiday detector Kit includes detector probe unit, earth lead with alligator clip and instructions
INDLPDKITB- Wet sponge spark tester
- Test coatings up to 12 mil (300 micron) for pinholes or holidays
- Used in accordance with AS 3894-2 Standard for coatings less than 10 mil (250 micron) thick (AS 3894.2-2002, Site testing of protective coatings, Method 2: Non-conductive coatings — Continuity testing — Wet sponge method)
- Audible pinhole-detection alarm
- Powered by three AA batteries
- Holiday detector Kit includes detector probe unit, earth lead with alligator clip and instructions
-
INCASEBOProtect your valuable instruments with this new robust carry case.
- Suitable for small hand held devices (e.g. DeFelsko Positector range)
- Includes pick and pluck foam for secure storage
- Case internal dimensions: 235mm L x 181mm W x 105mm D
- Press & pull latches
- Pad-lockable hasps
INCASEBOProtect your valuable instruments with this new robust carry case.- Suitable for small hand held devices (e.g. DeFelsko Positector range)
- Includes pick and pluck foam for secure storage
- Case internal dimensions: 235mm L x 181mm W x 105mm D
- Press & pull latches
- Pad-lockable hasps
-
INE130SC1
- For analysis of chloride ions, ferrous ions and pH level
- Chloride Ion Detection Threshold: approx 40 ppm
- Ferrous Ion Detection Threshold: approx 3 ppm
- pH measurement range: 4 to 9 verified by color scale
- Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
- Surface Contamination Analysis Test (SCAT) Kit
- 'Swab method' used in accordance with AS1627-1, AS3894-6 Standard
INE130SC1- For analysis of chloride ions, ferrous ions and pH level
- Chloride Ion Detection Threshold: approx 40 ppm
- Ferrous Ion Detection Threshold: approx 3 ppm
- pH measurement range: 4 to 9 verified by color scale
- Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
- Surface Contamination Analysis Test (SCAT) Kit
- 'Swab method' used in accordance with AS1627-1, AS3894-6 Standard
-
INEBSPG
- Visual representation of rust and coating preparation grades on steel substrates
- Similar to SSPC-VIS 1 Visual Standards and Reference Photographs
- Handy flip-top, wire bound, reference book
- Provides a visual comparison with SSPC standards. Full color photographs. Wipe-clean gloss pages. Flip top wire binding. Supplied in a protective pouch.
- Not a certified visual standard - use as a guide
INEBSPG- Visual representation of rust and coating preparation grades on steel substrates
- Similar to SSPC-VIS 1 Visual Standards and Reference Photographs
- Handy flip-top, wire bound, reference book
- Provides a visual comparison with SSPC standards. Full color photographs. Wipe-clean gloss pages. Flip top wire binding. Supplied in a protective pouch.
- Not a certified visual standard - use as a guide
-
INA1212Universal Paint Inspection Gage Kit
- Destructive DFT Dry film thickness tool for measurement of coating thickness.
- Built-in microscope with battery powered illumination – uses 1 x standard AA battery
- Cutters for coating thickness up to 80 mil (2000 micron)
- No 1 cutter for 1 to 80 mil (25 - 2000 micron) coatings
- No 2 cutter for 0.5 to 40 mil (12 - 1000 micron) coatings
- No 3 cutter for 0.1 to 8 mil (2 - 200 micron) coatings
INA1212Universal Paint Inspection Gage Kit- Destructive DFT Dry film thickness tool for measurement of coating thickness.
- Built-in microscope with battery powered illumination – uses 1 x standard AA battery
- Cutters for coating thickness up to 80 mil (2000 micron)
- No 1 cutter for 1 to 80 mil (25 - 2000 micron) coatings
- No 2 cutter for 0.5 to 40 mil (12 - 1000 micron) coatings
- No 3 cutter for 0.1 to 8 mil (2 - 200 micron) coatings
-
BAHNGKit
The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Test kit includes:
- Liquid filled stainless steel pressure gauge with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
BAHNGKitThe “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Test kit includes:
- Liquid filled stainless steel pressure gauge with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
The modular design of some of these inspection kits allows the inspector to run multiple types of tests, switching between tasks effortlessly. Offloading data is also extremely straightforward. They provide important intelligence that will help save on labor costs by minimizing re-blasting or painting needs, and detecting inefficiencies in surface preparation operations.
Some of these instrument kits require routine calibration to ensure accuracy. BlastOne is willing to train users on proper calibration procedures.