Instruments
Showing 1–15 of 174 results
-
DeFelsko has done it again! Now with an enhanced second version, their Dew Point Meter Logger instruments are award winners for remote monitoring of environmental conditions.
Both PosiTector DPML models offer the ability to continuously monitor climatic conditions remotely. Both offer wireless connectivity to the PosiTector app. Data from both is uploadable to PosiSoft for generating reports. And now, the new DPML+ offers all the features of the original DPML, with 2 key upgrades, as follows:
- AAA battery power, providing enhanced recording time.
- WiFi enabled, offering continuous uploading of data to the PosiSoft software AND email alerts to users when climate conditions fall outside of user-defined limits.
Enjoy the greater peace-of-mind offered by the DeFelsko DPM-L series with autonomous recording and reporting of the climatic conditions over the life of your projects.
-
INDPGKITThe PosiTest Paint Gage (PG) - Defelsko's precision instrument for measuring paint layer thickness. By utilizing a proven destructive technique, the PosiTest PG can measure one or multiple paint layers (providing they are different in color) on any rigid substrate, including metal, plastic and wood. The Paint Gage Kit comes complete with the following: PosiTest PG instrument, 3 cutting tips (1x, 3x, and 10x), carry case, certificate of calibration, and more. MPN: PGKITINDPGKITThe PosiTest Paint Gage (PG) - Defelsko's precision instrument for measuring paint layer thickness. By utilizing a proven destructive technique, the PosiTest PG can measure one or multiple paint layers (providing they are different in color) on any rigid substrate, including metal, plastic and wood. The Paint Gage Kit comes complete with the following: PosiTest PG instrument, 3 cutting tips (1x, 3x, and 10x), carry case, certificate of calibration, and more. MPN: PGKIT
-
The Testex tape process of measuring surface profile has been used for over 50 years. It is a simple, reliable, and repeatable way of determining surface profile parameters. DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors. DeFelsko is now offering updated packaging in 50-piece packs while continuing to offer the legacy roll packaging. NOTE - the profile ranges are not entirely the same between them - their respective ranges are shown under the Product Description tab. Tape options include the following:
- Conventional Testex Press-O-Film Tape grades.
- Use with analog spring or digital micrometers or with the PosiTector RTR H probe.
- Optical Grade Testex Press-O-Film Tape Grades
- Use with PosiTector RTR 3D probe. Provides surface data files (.sdf) that allow both 2D and 3D measurements.
- Conventional Testex Press-O-Film Tape grades.
-
INDHHDCOUPLER
- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
INDHHDCOUPLER- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
-
INDBOOTSMLINKFor use with the PosiTector SmartLinkINDBOOTSMLINKFor use with the PosiTector SmartLink
-
INLCX10DEXSIL® Lead Test is a sensitive, single-use field test for detecting lead on non-porous surfaces, such as painted areas and objects exposed to lead dust. Utilizing the rhodizonate method, it ensures precise reagent delivery through premeasured, crushable ampules. Packaged in boxes of 10.INLCX10DEXSIL® Lead Test is a sensitive, single-use field test for detecting lead on non-porous surfaces, such as painted areas and objects exposed to lead dust. Utilizing the rhodizonate method, it ensures precise reagent delivery through premeasured, crushable ampules. Packaged in boxes of 10.
-
Keane-Tator Surface Profile Comparator Grit/Slag, Shot, & Sand/Garnet with Illuminated Magnifier 372
Keane-Tator Surface Profile Comparator Grit/Slag, Shot, & Sand/Garnet with Illuminated Magnifier 372
INDSPCWM- Pocket-size field reference comparator
- Used to estimate surface profile roughness by feel (tactile) and/or sight (visual)
- Each comparator has four or five sectors with a know - and marked - surface profile measurement
- Abrasive-specific comparators for:
- grit profile
- sand profile (KTA only)
- shot profile
- Used in accordance with AS1627-4, AS3894-5 Standards (and for ISO comparator ISO8501-1, 2 Standard also)
- Supplied with protective pouch and instructions
Keane-Tator Surface Profile Comparator Grit/Slag, Shot, & Sand/Garnet with Illuminated Magnifier 372
INDSPCWM- Pocket-size field reference comparator
- Used to estimate surface profile roughness by feel (tactile) and/or sight (visual)
- Each comparator has four or five sectors with a know - and marked - surface profile measurement
- Abrasive-specific comparators for:
- grit profile
- sand profile (KTA only)
- shot profile
- Used in accordance with AS1627-4, AS3894-5 Standards (and for ISO comparator ISO8501-1, 2 Standard also)
- Supplied with protective pouch and instructions
-
ING1135
- Magnetic base clings to steel surfaces
- Allow 30 minutes stabilization time prior to reading
- No batteries required
- Optional pre-delivery Test Certificate - order separately
- Accuracy ± 3°C (when stabilized)
ING1135- Magnetic base clings to steel surfaces
- Allow 30 minutes stabilization time prior to reading
- No batteries required
- Optional pre-delivery Test Certificate - order separately
- Accuracy ± 3°C (when stabilized)
-
INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3
-
INH1311A
- 2 replaceable glass mirrors with each package
- Soft grip handle for hand-held comfort
- Extends up to 76cm in overall length
- 6cm of mirroring capability
- Ideal for any hard-to-reach-area
INH1311A- 2 replaceable glass mirrors with each package
- Soft grip handle for hand-held comfort
- Extends up to 76cm in overall length
- 6cm of mirroring capability
- Ideal for any hard-to-reach-area
-
Thickness standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.
DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified polystyrene blocks, intended for probes that measure thick coatings (60 mils / 1500 microns and up)
Select the Standard set that most closely matches the measuring range of your probe. See selection chart under the Description tab.
-
IND6000CASENYLON
- Protects gage, probe and accessories during storage and transportation
- Made of durable nylon
- Manufacturer part #CASENYLON-G
IND6000CASENYLON- Protects gage, probe and accessories during storage and transportation
- Made of durable nylon
- Manufacturer part #CASENYLON-G
-
Surface Profile Standards and Shim Sets are used for checking and adjusting calibration on PosiTector SPG, PosiTector RTR (and other depth micrometer probe) instruments. Product details as follows:
- For the PosiTector SPG:
- Certified Standards. Typically used in calibration labs, these are available for any user who desires this level of verification. Includes serialized and traceable height standards mounted to a metal plate. Labeled in both metric and imperial units.
- Certified Shim Set. Premium option for everyday use with any depth micrometer using a fine-pointed probe (as well as the PosiTector SPG). Includes 3 shims at 50/125/500 microns (2, 5, 20 mils).
- Zero Glass Plate / Metal Shim (Non-Certified). For training and quick checks for accuracy, each new SPG unit comes with this verification set, with replacement / additional units also available for purchase here.
- For the PosiTector RTR: (both models unless otherwise noted)
- Certified Shim Set. Premium option to check Peak Height measurements for accuracy verification on the RTR series (as well as other spring micrometer replica tape readers).
- Non-Certified Shim Set (aka Precision Plastic Shim Set). Lower cost version of the above, ideal for everyday accuracy verification.
- Single Check Shim. This non-certified shim comes standard with each new RTR and is available as a replacement if desired, although it is more economical to purchase the above full set.
- Check Tape. This reusable tape is used to verify Peak Density, and is used on the RTR 3D model only.
- For the PosiTector SPG:
-
INDSSTCUP
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10.
MPN: SSTCUP
INDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10.
MPN: SSTCUP