Contractor Pots
Showing all 9 results
-
VCBRSMP46FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty
- Blasting rate up to 2 m2 per hour. Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
- Utilizes the TeraValve XL abrasive metering valve
- Compressed Air Requirement is only 185 cfm
- Has wheels and fork pockets for easy portability by hand, or by forklift.
- 100% compressed air powered - no electricity required
- Various workheads are available for flat surfaces, inside corners, outside corners, etc. - enquire for details.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
VCBRSMP46FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty- Blasting rate up to 2 m2 per hour. Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
- Utilizes the TeraValve XL abrasive metering valve
- Compressed Air Requirement is only 185 cfm
- Has wheels and fork pockets for easy portability by hand, or by forklift.
- 100% compressed air powered - no electricity required
- Various workheads are available for flat surfaces, inside corners, outside corners, etc. - enquire for details.
- Genuine Products - Manufactured by Schmidt / Axxiom Manufacturing
-
BMS1172TERA
- Manufactured by Schmidt to BlastOne specifications
- High Performance abrasive blasting equipment
- Valving system designed to have a maximum of 3psi pressure drop
- Specified Capacity (approx)
- 11.7 cu ft
- Abrasive Capacity (approx)
- Garnet - 700 kg
- Pressure Rating: 150psi
- Includes: Moisture separator and inlet fitting
BMS1172TERA- Manufactured by Schmidt to BlastOne specifications
- High Performance abrasive blasting equipment
- Valving system designed to have a maximum of 3psi pressure drop
- Specified Capacity (approx)
- 11.7 cu ft
- Abrasive Capacity (approx)
- Garnet - 700 kg
- Pressure Rating: 150psi
- Includes: Moisture separator and inlet fitting
-
BMS65MB-P
The "Mist Blaster For Wet Abrasive Blasting" (SKU: BMS65MB-P) offers a versatile blasting experience with the capability for dustless vapor or dry, washdown, and blowdown. Featuring a pot capacity of 6.5 cu ft and a blast pressure range of 75-150 psi, it's an efficient solution for both wet and dry blasting needs.
- Versatile capability - Dustless Vapor or Dry, Washdown and Blowdown
- Pot capacity 6.5 cu ft / 184 litres
- Blast pressure ranging from 75-150 psi
- Single Outlet with Tera Valve XL metering valve
- Has secondary wheels to ease transportation
BMS65MB-PThe "Mist Blaster For Wet Abrasive Blasting" (SKU: BMS65MB-P) offers a versatile blasting experience with the capability for dustless vapor or dry, washdown, and blowdown. Featuring a pot capacity of 6.5 cu ft and a blast pressure range of 75-150 psi, it's an efficient solution for both wet and dry blasting needs.
- Versatile capability - Dustless Vapor or Dry, Washdown and Blowdown
- Pot capacity 6.5 cu ft / 184 litres
- Blast pressure ranging from 75-150 psi
- Single Outlet with Tera Valve XL metering valve
- Has secondary wheels to ease transportation
-
- Manufactured by Schmidt to BlastOne specifications
- High Performance abrasive blasting equipment
- Valving system designed to have a maximum of 3psi pressure drop
- Specified Capacity (approx)
- 6.5 cu ft / 185 litres
- Abrasive Capacity (approx)
- Garnet - 430 kg
- Steel Grit - 700 kg
- Pressure Rating: 150psi
- Includes: Moisture separator and inlet fitting
-
- Manufactured by Schmidt Abrasive Blasting & Axxiom Manufacturing to BlastOne specifications
- Valving system designed to have a maximum of 3psi pressure drop
- Specified Capacity (approx)
- 3.5 cu ft / 99 litres
- Abrasive Capacity (approx)
- Garnet - 230 kg
- Steel Grit - 390 kg
- Pressure Rating: 150psi
- Includes: Moisture separator and inlet fitting
-
- Wet blast or dry blast with a single unit
- Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt M.I.S.T.™ technology that allows precise control of the amount of water injected into the air stream while blasting
- Set and forget switching between machine modes
- Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
- Industry-leading productivity and reliability from Schmidt abrasive blasting technology
- Schmidt Tera Valve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
- Wide range of blasting pressure capabilities from 10 to 150 psi
- Toggle between wet blast, dry blast, and blow-off using a single control panel
- Increased portability
-
- The most versatile, easy-to-regulate dry blast machine on the market
- 10-150psi blasting pressure range
- With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate "metering" of hard-to-flow abrasives like Soda and fine Garnets
- With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types - fine to coarse
- With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
- G2 pneumatic deadman control, 55' twinline control hose, 55' water line with wet blast attachment for dust suppression included with purchase
- Genuine Products - Manufactured by Axxiom Manufacturing - Schmidt®
-
BMS1001TV
- 10.0 cu ft Blast pot
- Manufactured by Schmidt to BlastOne unique specifications
- Single outlet Thompson Valve II abrasive metering valve
- Approx 670 kg garnet abrasive capacity
- Comes with pnuematic deadman handle and 20m of control hose
- Excellent for a blastroom application with 1-2 blasters
- Meets all Australian Standards
BMS1001TV- 10.0 cu ft Blast pot
- Manufactured by Schmidt to BlastOne unique specifications
- Single outlet Thompson Valve II abrasive metering valve
- Approx 670 kg garnet abrasive capacity
- Comes with pnuematic deadman handle and 20m of control hose
- Excellent for a blastroom application with 1-2 blasters
- Meets all Australian Standards
-
BMS200
- 20.0 cu ft Blast pot
- Manufactured by Schmidt to BlastOne unique specifications
- Dual outlet Thompson Valve II abrasive metering valves
- Approx 1350 kg garnet abrasive capacity
- Comes with two pneumatic deadman handles and two lengths of control hose
- Excellent for a blastroom application with 1-2 blasters
- Meets all Australian Standards
BMS200- 20.0 cu ft Blast pot
- Manufactured by Schmidt to BlastOne unique specifications
- Dual outlet Thompson Valve II abrasive metering valves
- Approx 1350 kg garnet abrasive capacity
- Comes with two pneumatic deadman handles and two lengths of control hose
- Excellent for a blastroom application with 1-2 blasters
- Meets all Australian Standards