My Account
All Products
Showing 736–750 of 963 results
-
SBMGI- Formed steel panels and support structure with wall wear lining protection
- Typical Size - 3.6 x 3.6 x 9.1m up to 4.8 x 4.8 x 24 m
- Material Handling can vary- Job carts / forklift / manual handling
- Partial underfloor recovery, with conveyors running down both sides of the walls.
- Airwash abrasive cleaner
- Reverse pulse cartridge dust collector
SBMGI- Formed steel panels and support structure with wall wear lining protection
- Typical Size - 3.6 x 3.6 x 9.1m up to 4.8 x 4.8 x 24 m
- Material Handling can vary- Job carts / forklift / manual handling
- Partial underfloor recovery, with conveyors running down both sides of the walls.
- Airwash abrasive cleaner
- Reverse pulse cartridge dust collector
Part Number Purchase Price SBMGI Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
- Installed at blast machine inlet for final stage moisture droplet removal before air enters blast machine
- Tangential flow and elementless design
- Minimal pressure loss for peak blasting productivity
- Supplied with manual drain valve
- Optional autodrain accessory available
- Male threaded inlet and outlet ports
- Inlet fitting or ball valve not supplied - order separately
- Specify Size - 250cfm or 400cfm, based on the size of your blast nozzle and compressor
- Includes internal stainless steel coalescer
-
INCASEBOProtect your valuable instruments with this new robust carry case.
- Suitable for small hand held devices (e.g. DeFelsko Positector range)
- Includes pick and pluck foam for secure storage
- Case internal dimensions: 235mm L x 181mm W x 105mm D
- Press & pull latches
- Pad-lockable hasps
INCASEBOProtect your valuable instruments with this new robust carry case.- Suitable for small hand held devices (e.g. DeFelsko Positector range)
- Includes pick and pluck foam for secure storage
- Case internal dimensions: 235mm L x 181mm W x 105mm D
- Press & pull latches
- Pad-lockable hasps
-
INE130BRESLE1
- Refill kit with 50 bresle patches
- Used to measure total salts (Chlorides)
- High adhesion bresle patches version
- Measurement range: 20 ppm to 5000 ppm
- Used in accordance with ISO8502-6, AS1627-4 Standards
INE130BRESLE1- Refill kit with 50 bresle patches
- Used to measure total salts (Chlorides)
- High adhesion bresle patches version
- Measurement range: 20 ppm to 5000 ppm
- Used in accordance with ISO8502-6, AS1627-4 Standards
Part Number Purchase Price INE130BRESLE1 $153.11 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$153.11
-
-
- Silenced petrol generator with inverter
- 50Hz
- 230V S2A single phased with Australian sockets
-
- Use at entry-exit points and around the site perimeter
- Alert and warn personnel of danger
- Durable Colorbond metal
- Large 24" x 18" (600 mm x 450 mm) size
- Bold colors and clear message (printed 1 side only)
- Pre-punched fixing holes for wiring the sign onto a fence or mounting it onto a swing stand frame
- Signs have small rounded corners for safe handling
- Customized warning message texts available – contact BlastOne
-
- Nylon webbing whipchecks - easier to install, less damaging to hose and will provide a longer service life
- The use of a whpcheck restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.
-
Hours of relief from hot temperatures
- Remains at a constant 12°C (55°F) for hours of cooling
- 20 minutes in ice or cold water to recharge
- Interchangeable front/back cool pack system
- Fully adjustable
- NEW ANSI/ISEA 107-2010 Class 2 High-Visibility Isotherm
- Constant temperature phase-change technology outperforms ice and gel packs by hours!
-
NK924Laminated Glass Replacement Visor to suit Sundstrom SR200 Full Face Respirator
- Sold individually
- Solvent resistant glass visor will last longer than Polycarbonate / Plastic visor that comes standard on the SR200 Respirator.
- Spray Painters choice!
NK924Laminated Glass Replacement Visor to suit Sundstrom SR200 Full Face Respirator- Sold individually
- Solvent resistant glass visor will last longer than Polycarbonate / Plastic visor that comes standard on the SR200 Respirator.
- Spray Painters choice!
-
IPRIPTB
- Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
- Offers full 360 degree coverage of pipe internals
- Self-propelled forward or reverse motion
- Can blast pipelines 1.2 - 3.6 meters in diameter
- Lowers labor costs as much as 75% compared with manual blast-pot operations
- Eliminates inconsistencies commonly found with manual blasting
IPRIPTB- Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
- Offers full 360 degree coverage of pipe internals
- Self-propelled forward or reverse motion
- Can blast pipelines 1.2 - 3.6 meters in diameter
- Lowers labor costs as much as 75% compared with manual blast-pot operations
- Eliminates inconsistencies commonly found with manual blasting
Part Number Purchase Price IPRIPTB Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
SBMFLOFM
- Designed and manufactured to meet the current Spray Booth Standards - AS4114
- Most booths are customised to individual needs
- Wall and overhead lighting is incorporated
- Escape doors, mixing benches and spray painting equipment are all in the design
- Can be either open front or enclosed style booths
- 12 month warranty
SBMFLOFM- Designed and manufactured to meet the current Spray Booth Standards - AS4114
- Most booths are customised to individual needs
- Wall and overhead lighting is incorporated
- Escape doors, mixing benches and spray painting equipment are all in the design
- Can be either open front or enclosed style booths
- 12 month warranty
Part Number Purchase Price SBMFLOFM Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
BAPX2Large Pop up valve with External Sleve to suit a standard blast machine
BAPX2Large Pop up valve with External Sleve to suit a standard blast machine
-
BAP5
- Replacement Seating Ring – Large
- Suits Clemco blast machines
- Pop-up valves sold separately
- Rings Sold Individually
BAP5- Replacement Seating Ring – Large
- Suits Clemco blast machines
- Pop-up valves sold separately
- Rings Sold Individually
-
ND316
- Uncorded, Tapered Style
- Packed in individual pairs
- Box of 200 pairs
ND316- Uncorded, Tapered Style
- Packed in individual pairs
- Box of 200 pairs
-
Abrasive blasting hopper lid and mesh screen
-
- Lid and Screen Set designed to suit blast pots
- Hole size 1/8” (3 mm)
- Screen sieves foreign matter out of the abrasive
- Lid keeps moisture, rain, dew, etc – out of the blast machine
- Select the size to suit diameter of your blast pot 12" 18" 24"
- Fit most portable blast machines, made by Schmidt abrasive blasting, Axxiom Manufacturing, clemco
-
