All Products
Showing 421–435 of 1032 results
-
BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. Inspection instruments are an investment worth protecting and DeFelsko has a range of protective cases available, as follows:
- The PosiTector Case. Sturdy hardshell design designed to carry a PosiTector gage / body and multiple probes. Space for manuals, calibration certificates, and more. MPN: CASEINSP
- The Pelican Standard Inspection Kit Case. Lightweight, watertight, and crushproof, this case securely stores a PosiTector Gage and 3+ PosiTector probes with customized foam inserts. 30 x 22.5 x 13.2cm. The MPN is CASEINSP-P.
- The Pelican Large Inspection Kit Case. Like the smaller Standard version above, this unit is lightweight, watertight, and crushproof but is larger to accommodate 5+ probes as well as SST Soluble Salt Tester accessories. 43.2 x 29.7 x 15.7cm. The MPN is CASEINSPL-P.
- The Pelican Adhesion Tester Case. Heavy duty, waterproof construction features customized foam inserts for the PosiTest AT-A automatic tester. 46.2 x 34 x 17cm. The MPN is CASEATAB-P.
-
INDPOUCHDFTBlastOne carries all DeFelsko instruments, accessories, and supplies. This leather pouch has been specially designed for the PosiTest DFT gauge and economically provides protection for your investment. MPN: POUCH-DFTINDPOUCHDFTBlastOne carries all DeFelsko instruments, accessories, and supplies. This leather pouch has been specially designed for the PosiTest DFT gauge and economically provides protection for your investment. MPN: POUCH-DFT
-
Thickness Standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration. These Plastic Shims (aka foils) are low-cost alternative to coated metal plates. They are available in Certified (individual shims or full sets) and in Un-Certified sets. Accuracy is somewhat less than metal plates and they are more sensitive to heat. They are intended for use over a Zero Plate, or over an uncoated substrate. A set of un-certified plastic shims is included with most electronic DeFelsko coating thickness gauges. Replacement sets and certified options are available here as follows:
- Un-Certified. These are checked for accuracy within tolerance shown below at DeFelsko, but are not traceable to any standard. They come as a set of 5 only, in the following approximate thicknesses:
- 25 microns / 1 mil (Orange), +- 20% accuracy
- 50 microns / 2 mils (Red), +- 10% accuracy
- 125 microns / 5 mils (Blue), +- 5% accuracy
- 250 microns / 10 mils (Brown), +- 5% accuracy
- 500 microns / 20 mils (Yellow), +- 5% accuracy
- Certified. Includes certificate of calibration traceable to PTB and all are accurate to within 2 microns / 0.08 mils. Available in the following thicknesses individually, or as a complete set of 8 shims:
- 25 microns / 1 mil (Orange)
- 50 microns / 2 mils (Red)
- 75 microns / 3 mils (Green)
- 125 microns / 5 mils (Blue)
- 250 microns / 10 mils (Brown)
- 500 microns / 20 mils (Yellow)
- 1000 microns / 40 mils (White)
- 1500 microns / 60 mils (Black)
- Un-Certified. These are checked for accuracy within tolerance shown below at DeFelsko, but are not traceable to any standard. They come as a set of 5 only, in the following approximate thicknesses:
-
INDUSBAC
The DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.
- Designed for uninterrupted use of PosiTector® devices
- Includes USB cable and AC power adapter for versatile power options
- Compatible with a wide range of PosiTector® models
- Selection of electrical plugs for international compatibility
- Ideal for continuous operation without battery dependency
INDUSBACThe DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.
- Designed for uninterrupted use of PosiTector® devices
- Includes USB cable and AC power adapter for versatile power options
- Compatible with a wide range of PosiTector® models
- Selection of electrical plugs for international compatibility
- Ideal for continuous operation without battery dependency
-
The PosiTector® CMM IS - DeFelsko's solution for In Situ Concrete Moisture Metering conforming to ASTM F2170 testing standards. Innovative and simple to use, this PosiTector Concrete Moisture Meter offers the highest levels of testing accuracy, helping to prevent costly concrete coating failures. Selected features as follows:
- Simple Design. Individual In-Situ meters, inserted into holes drilled into concrete, connect wirelessly to the PosiTector App, or to a PosiTector Advanced Gage/DPM probe.
- Capable. The PosiTector CMMIS offers the most accurate moisture measurement in concrete as it detects moisture levels well below the floor surface.
- Configurable. With various expandable package options, the CMM IS platform can test on any size concrete floor, as follows:
- 3 probe Basic Kit, including caps, probe sleeve extensions, calibration check chambers and other accessories required for testing.
- 5 probe Complete Kit, including all the above plus a carrying case and a vacuum tool for cleaning out the drilled holes.
- 5 Probe Pro Kit, combines a PosiTector Advanced Gage/DPM probe with the above Complete Kit.
Among other requirements, ASTM F2170 requires 3 tests for the first 1000 square feet of floor area, and one additional test for each 1000 square feet. For larger floors, CMM IS Expansion Kits are available in various sizes.
-
The innovative and capable PosiTector Gage / Body is the backbone of a large and growing family of DeFelsko inspection equipment. When paired with 1 of the over 10 interchangeable probes, it can measure and store data for common environmental, surface, coating and more conditions. DeFelsko offers two versions of gauges (Standard and Advanced) which can be purchased individually, or in a variety of DeFelsko Body / Probe packages including 1 or more probes, depending on the application. To compare features on the two gage versions, see our PosiTector 6000 Standard and Advanced Body comparison chart. This page shows the Gage Body options only. BlastOne carries all other DeFelsko items including individual PosiTector 6000 probes, PosiTector Standard Body/Probe Kits, PosiTector Advanced Body/Probe Kits, and DeFelsko Coating Inspector Packages. NOTE: This new Gen 5 PosiTector body platform is backwards-compatible with all Positector probes manufactured since 2012.
-
The DeFelsko® PosiTector® GLS Gloss Meter (SKU: P-INDGLS) delivers precise gloss, haze, and reflectance measurements for a variety of surface finishes. With three probe configurations and compatibility with the versatile PosiTector platform, it’s perfect for field and shop use.
Key Features:
- Three probe options: 60°, 20°/60°, or 20°/60°/85° angles with haze indexing
- Compatible with PosiTector Standard and Advanced bodies
- Integrated calibration standard for Auto Calibration
- Durable, weatherproof, and dustproof design
- Measures over 60 readings per minute with scan mode for advanced models
-
The PosiTector®SHD - DeFelsko's solution for measuring shore hardness on non-metallic surfaces. Capable and configurable, it offers the following:
- Familiar. Built on the tried-and-true PosiTector gauge / body platform, with interchangeable measurement probe options.
- Capable. The SHD comes in two probe models for different hardness ranges.
- Shore A (soft to hard materials such as soft rubber, elastomers, neoprene, silicone, etc.
- Shore D (medium to extra hard materials such as hard rubber, hard plastics, epoxies, PVC, acrylic, etc.
- Configurable. Available as follows:
- Probe only. Use with your existing PosiTector gage.
- Standard PosiTector package with choice of probe.
- Advanced PosiTector package with choice of probe.
- Note: All PosiTector SHD packages come with case, test block, calibration certificate, holster, and more.
Note: Compare specs and features of the DeFelsko Standard and Advanced Gage / Bodies on their separate web page.
-
PosiTector SHD Test Blocks - DeFelsko accessories for checking the operation of the SHD Durometer Probes.
Available in 3 variations each for Shore A and Shore D measurement ranges.
-
DeFelsko test stands for use with their Shore Hardness Durometers: Helps reduce operator influence on testing results by positioning the probe in a controlled, repeatable way.
Two types available:
- INDSHDSTANDA - for use with Shore A probe. 1 kg (2.2 lb) deadweight included.
- INDSHDSTANDD - for use with a Shore D probe. 5 kg (11 lb) deadweight included.
Note: Other brands of test stands can be used with the DeFelsko SHD probes by purchasing the DeFelsko Universal Adaptor Mount.