My Account
All Products
Showing 301–315 of 963 results
-
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 25mm abrasive trap on the RMC valve (factory part number 01925). Includes the following:- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 25mm abrasive trap on the RMC valve (factory part number 01925). Includes the following:- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
-
DMWTXE993
- Service Kit for 3-wire Sure-Fire™ Electric Deadman Handle
- Sold as a Kit which Includes:
- Switch
- Boot
- Jumper
- 122 cm wire
- Genuine Parts - Manufactured by Western Technology
DMWTXE993- Service Kit for 3-wire Sure-Fire™ Electric Deadman Handle
- Sold as a Kit which Includes:
- Switch
- Boot
- Jumper
- 122 cm wire
- Genuine Parts - Manufactured by Western Technology
Part Number Purchase Price DMWTXE993 $672.20 Service Kit for SURE-FIRE Electric Remote Control Deadman Handle 3 wire
Part #DMWTXE993
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$672.20
-
-
DMWTXE99
- Service kit for Western Tech™ Electric Remote control handle
- Sold as a Kit which Includes:
- Switch
- Boot
- Jumper
- And 122 cm wire
- Genuine Parts - Manufactured by Western Technology
DMWTXE99- Service kit for Western Tech™ Electric Remote control handle
- Sold as a Kit which Includes:
- Switch
- Boot
- Jumper
- And 122 cm wire
- Genuine Parts - Manufactured by Western Technology
Part Number Purchase Price DMWTXE99 $305.47 Service Kit for Western Tech Electric Remote Control Deadman Handle 2 wire
Part #DMWTXE99
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$305.47
-
-
- Available in sizes 6, 13, 19 mm
- Some larger sizes are also available
-
The SnakeBite XP is the high-performance nozzle used in the highly successful SnakeBite XQ silenced configuration. As the XP uses a simple bump cap on the end (instead of the silencer), it does not have the noise and thrust reduction of the XQ. It is very fast and exceeds the performance of our hyper nozzle. Details as follows:
- Performance:
- The advanced modeling used when designing this Snakebite XP hyper nozzle has taken blasting performance to a whole new level. The refined internal geometry coupled with the non-silencing bump-cap produces very fast cleaning speed indeed.
- Liner:
- The new internal geometry when combined with the silicon nitride composition extends usable life greatly.
- Jacket:
- Anodized aluminum with ergonomic shape makes for a very comfortable grip.
- Sizes:
- Available in the following orifice sizes: 6, 7, 8, & 10
- Overall length varies from 10" to 13", depending on orifice size.
- Thread type:
- Available in standard 2" Contractor thread only. (See You May Also Like nozzle thread adapters below if you want to use with fine thread nozzle holders.)
Note: Inquire for details about our free trial offer.
- Performance:
-
- 2" UNC (50mm) coarse Contractor thread 'C' or 1 1/4" NPSM (32mm) Fine Industrial thread 'F'
- Square thorat entry, venturi
- Tungsten carbide liner
- Urethane jacket, brass thread
- Large square blast pattern - less overlap when blasting
- Alignment ridges on jacket
-
GV213000006
- Replacement OEM Plunger for TeraValve™ XL
- Tungsten Carbide for long life
- Schmidt® / Axxiom part # 2130-000-06
- NOTE - this is included in the Extended Rebuild kit GV213000099
GV213000006- Replacement OEM Plunger for TeraValve™ XL
- Tungsten Carbide for long life
- Schmidt® / Axxiom part # 2130-000-06
- NOTE - this is included in the Extended Rebuild kit GV213000099
Part Number Purchase Price GV213000006 $668.13 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$668.13
-
-
GR224453
- Can be used in tip filter housing, swivel spray nozzle or inline filter
- #100 mesh
- 0.1mm
- Sold in packs of 5
- Genuine Graco part
GR224453- Can be used in tip filter housing, swivel spray nozzle or inline filter
- #100 mesh
- 0.1mm
- Sold in packs of 5
- Genuine Graco part
-
Refresh your Tite Space Invader Blasting Kit with replacement repair rods. Comes in various lengths from 30 - 152 centimetres.
- Durable and long-lasting construction
- Easy-to-use design for quick repairs
- Compatible with a variety of pipe sizes and materials
-
Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:
- 3/8" NPT Thread in either Male or Female configuration
- Male version has brass threads and requires a minimum opening clearance of 1". This version is 1-7/8" long.
- Female version has steel threads and requires a minimum opening clearance of only ¾". This version is 3-1/8" long.
- These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
- Angle options include:
- 45° & 60° forward blast
- 90° right angle blast
- 135° reverse blast
- Some options available in double, triple or quad orifices in addition to single.
- Note: Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
- Stock version uses tungsten carbide lining.
-
The blast nozzle for the ConeBlast Internal Pipe Blaster is a key element in controlling the volume of air/abrasive flow. It is subject to high wear and is a common replacement part. Additional details:
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
- BNAFR8 requires 250CFM
- BNARF10 requires 400CFM
- (The size variants are interchangeable.)
- Construction. These nozzles are made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
-
Surface Profile Standards and Shim Sets are used for checking and adjusting calibration on PosiTector SPG, PosiTector RTR (and other depth micrometer probe) instruments. Product details as follows:
- For the PosiTector SPG:
- Certified Standards. Typically used in calibration labs, these are available for any user who desires this level of verification. Includes serialized and traceable height standards mounted to a metal plate. Labeled in both metric and imperial units.
- Certified Shim Set. Premium option for everyday use with any depth micrometer using a fine-pointed probe (as well as the PosiTector SPG). Includes 3 shims at 50/125/500 microns (2, 5, 20 mils).
- Zero Glass Plate / Metal Shim (Non-Certified). For training and quick checks for accuracy, each new SPG unit comes with this verification set, with replacement / additional units also available for purchase here.
- For the PosiTector RTR: (both models unless otherwise noted)
- Certified Shim Set. Premium option to check Peak Height measurements for accuracy verification on the RTR series (as well as other spring micrometer replica tape readers).
- Non-Certified Shim Set (aka Precision Plastic Shim Set). Lower cost version of the above, ideal for everyday accuracy verification.
- Single Check Shim. This non-certified shim comes standard with each new RTR and is available as a replacement if desired, although it is more economical to purchase the above full set.
- Check Tape. This reusable tape is used to verify Peak Density, and is used on the RTR 3D model only.
- For the PosiTector SPG:
-
ACFRL06
- 3-piece filter/regulator/lubricator
- Compact body design
- 2-piece modular joiner set
- Snap-lock knob prevents accidental change of set pressure
- Easy-to-read pressure gauge included
- Maximum supply pressure - 150psi
- Wall mount brackets included
- Manufactured by Wilkerson®
ACFRL06- 3-piece filter/regulator/lubricator
- Compact body design
- 2-piece modular joiner set
- Snap-lock knob prevents accidental change of set pressure
- Easy-to-read pressure gauge included
- Maximum supply pressure - 150psi
- Wall mount brackets included
- Manufactured by Wilkerson®
-
INDSSTCUP
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10.
MPN: SSTCUP
INDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments.
As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10.
MPN: SSTCUP
-
ACS400AC
- Efficient cooling with Aftercooler 5” 400 CFM
- Pneumatic Fan for rapid heat dissipation
- Durable construction for long-term reliability
- Compatible with various pneumatic tools
- Prevents damage and improves efficiency
ACS400AC- Efficient cooling with Aftercooler 5” 400 CFM
- Pneumatic Fan for rapid heat dissipation
- Durable construction for long-term reliability
- Compatible with various pneumatic tools
- Prevents damage and improves efficiency
Part Number Purchase Price ACS400AC $12,430.28 After cooler 5'' 400 cfm, with pneumatic fan for Squat Aftercooler AirDryer System
Part #ACS400AC
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$12,430.28
-
