Search: schmidt axxiom

• Abrasive holding capacity of 3.5 cu ft / 100 litres
• Blasting rate up to 4.0 m² per hour
• Compressed Air Requirement 750 cfm
• On wheels for easy access. Includes fork pockets
• Recirculating full size blast & recovery unit
• 100% compressed air driven – no electricity required

• OEM replacement Cap for the MicroValve® 1.
• To connect Body & Plunger
• Schmidt® / Axxiom part # is 2125-000-02.

• OEM Replacement Spring for TeraValve™ XL
• Schmidt® / Axxiom part # is 2130-000-03

• OEM Plunger for the MicroValve® I.
• Wear point is Tungsten Carbide.
• Axxiom / Schmidt® part # is 2125-000-05.

• OEM Complete Rebuild Kit for Thompson® Valve II XL™
• Replacement Plunger, and Sleeve (w/ Wiper), Replacement Seals and O-Rings
• Schmidt® / Axxiom part # 2153-000-99

• OEM Replacement Urethane Seat for Thompson Valve 1
• This is one of the most common wear items, and easily replaced
• Schmidt / Axxiom part # 2149-000-10

• Repair Kit for MicroValve
• Replacement Repair Kit for MicroValve III
• Schmidt abrasive blasting equipment/ Axxiom Manufacturing part number 2127-100-99
• Complete Rebuild Kit for MicroValve 2 Schmidt / Axxiom part # 2127-100-99 Includes: GV214950006, GV212700005, GV701100506, GV212700012, GV212700015, and GV212710008

Upgrade your blast machines with the Replacement Bronze Element for Brass Inlet Strainer. Expertly designed by Schmidt® – Axxiom Manufacturing to strain out dust and grit from control lines.

• Perfectly fits the Brass Inlet Strainer on blast machines.
• 90 Micron Bronze Element designed to sieve out dust and grit effectively.
• Simple and straightforward replacement process.
• Authentic part crafted by the trusted Schmidt® – Axxiom Manufacturing.

• Blue OEM replacement knob for Microvalve® 2 and Microvalve® 3
• Schmidt® / Axxiom part # 2128-000-01

• Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
• Used when an overhead hopper automatically feeds abrasive into a blast machine.
• Rugged stainless steel body, compact, isolated 2-bolt construction.
• Doubles blast machine refill cycle time.
• Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
• Set and forget – flow rates stay set where you put them.
• High wear, rugged plunger seal.
• Stainless steel body for long life.
• Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
• Fit a rebuild kit while the valve is still fitted to the blast machine.
• Sold individually.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

• Service Kit for Auto Air Valve
• Service Kit for the 1-¼ (32mm) and 1-½ (38mm) Auto Air Valve

Schmidt changed the abrasive blasting industry when they introduced the MicroValve™.  Now known as the MicroValve I (or the Original Microvalve), it is still available although most pressure-release Schmidt pots now use the newer MicroValve III®.  

It features:

• Simple threaded screw-type metering
• Hardened steel threaded base nipple
• (The brass threaded coupling shown is available separately.)
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• Replacement Tungsten Carbide Sleeve for TeraValve™ XL™
• Includes O-Ring & Internal Wipers
• Schmidt® / Axxiom part # 2130-000-07

• Replacement OEM Body for TeraValve™ XL
• Cast Stainless Steel
• Schmidt® / Axxiom part # 2130-000-11

• Replacement Nut suit Thompson® Valve 1
• Price per pack of 4
• Schmidt / Axxiom part #

• OEM Replacement O-Ring for Thompson® Valve I
• Sits on the bottom of the Insert beneath the Tungsten Carbide Sleeve
• Schmidt® / Axxiom part # 2149-000-18

• OEM Rebuild Kit for TeraValve™ XL
• Includes Tungsten Carbide Sleeve & Plunger along with Seal kit
• Schmidt® / Axxiom part # 2130-000-99
• Includes: GV213000004, GV213000006, GV213000007, GV213000008, GV213000009, GV213000010

• OEM replacement Roll Pin for the MicroValve® 1.
• Holds the Knob to the Plunger
• Axxiom / Schmidt® part # is 2125-000-04.

The Schmidt TeraValve™ XL™ Vibration Discs are essential components designed to preserve the functionality and extend the lifespan of your TeraValve™ XL equipment. As OEM parts, these vibration discs are manufactured to meet the exact specifications and quality standards of your original equipment, ensuring flawless compatibility and performance. Packaged in sets of ten, these discs […]

The latest innovation in deadman safety technology from Axxiom is the BAABS (Blasting Accessories and Assist Bracket System). Intended to be the safest deadman on the market, it mechanically prevents inadvertent activation.  The Schmidt BAABS deadman is such a leap forward in safety technology that Axxiom provides them as standard equipment with most new blast pot or valve retrofit purchases.*

All BAABS use the Axxiom G3 trigger deadman configurable as either electric or pneumatic.

All BAABS units are capable of being fitted with the BAABS blast light for improved vision in dim or dusty environments.  (Note:  When the light is used with the Subcompact BAABS, there is not room for the thrust brace.)

*The standard configuration provided with new equipment is the Compact size.  See Product Description tab for all size options.

• OEM MicroValve®II Plunger
• Tungsten Carbide wear point
• Schmidt® / Axxiom Part # 2127-000-05

• Replacement Polyurethane Cleanout Plug for Microvalve® 3
• Bolts to Body, no threads
• Schmidt® / Axxiom Part # 2128-000-18

• Replacement Diaphragm for TeraValve™ XL
• Schmidt® / Axxiom part # 2130-000-04
• NOTE – this part is included in the TeraValve Rebuild Kits

BlastOne has replacement parts for all Axxiom / Schmidt metering valves.  This group includes the various sizes of pipe nipples, at the bottom of the base.

• 19mm x 19mm (¾” x ¾”) (Axxiom part #: 2130-005-12)
• 25mm x 32mm (1″ x 1-¼”) (Axxiom part #: 2130-006-12)
•  32mm x  32mm (1-¼” x 1-¼”) (Axxiom part #: 2130-007-12)
• 38mm x 38mm (1-½” x 1-½”) (Axxiom part #: 2130-008-12)
• NEW – 51mm x 51mm (2″ x 2″) (Axxiom part #: 2130-009-12F), offers maximum flow for high volume applications, such as VertiDrive robot.
• Base of Hardened Steel for extended usability
• Genuine Schmidt® Product

BlastOne has stocks the Axxiom replacement parts you need to keep your valves operating. These are the pipe nipples for the original Thompson I metering valve.

• 32mm x 32mm (1-¼” MNPT x 1-¼” MNPT), MPN 2149-007-15
• 38mm x 38mm (1-½” MNPT x 1-½” MNPT), MPN 2149-008-15
• Hardened Steel for extended durability
• Genuine Schmidt / Axxiom Parts

• Replacement Sleeve O-Rings for TeraValve™ XL™
• Pack of 10
• Schmidt® / Axxiom part # 2130-000-09

• Replacement OEM Plunger Seal suit TeraValve XL
• Pack of 10
• Schmidt / Axxiom Part # 2130-000-08

• Replacement TeraValve™ XL™ Knob
• These knobs are blue
• Schmidt® / Axxiom part # is 2130-000-01

• OEM Replacement Base for Thompson® Valve I
• This is the part that bolts to the body, and houses the pipe nipple
• Schmidt® / Axxiom part # is 2149-000-11

• OEM Replacement Cylinder for Thompson® Valve I
• Also know as the Body for a Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-09

• Manufactured by Schmidt Abrasive Blasting & Axxiom Manufacturing to BlastOne specifications
• Valving system designed to have a maximum of 3psi pressure drop
• Specified Capacity (approx)
  • 3.5 cu ft / 99 litres
  • Abrasive Capacity (approx)
  • Garnet – 230 kg
  • Steel Grit – 390 kg
• Pressure Rating: 150psi
• Includes: Moisture separator and inlet fitting

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Blasting rate up to 2 m² per hour.  Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
• Utilizes the TeraValve XL abrasive metering valve
• Compressed Air Requirement is only 185 cfm
• Has wheels and fork pockets for easy portability by hand, or by forklift.
• 100% compressed air powered – no electricity required
• Various workheads are available for flat surfaces, inside corners, outside corners, etc. – enquire for details.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

• Replacement TeraValve™ XL Cap
• Top part of the TeraValve™, between the Knob and Body
• Schmidt® / Axxiom part # 2130-000-02

• Replacement OEM Diaphragm Plate for TeraValve™ XL
• Schmidt® / Axxiom part # 2130-000-05

Ensure the smooth operation of your Pneumatic Response Deadman Handle with the “Response Deadman Service Kit” (SKU: DM226300299). This complete kit features genuine parts by Schmidt/Axxiom Manufacturing for efficient in-field repairs.

• Service Kit for Response Deadman
• Service Kit for Pneumatic Response Deadman Handle

• Replacement OEM Cleanout Port suit TeraValve™ XL™
• Blue Nylon Plug
• Schmidt® / Axxiom part # is 2130-000-13

• Genuine OEM Replacement Parts Kit (Seals Only) for MicroValve 3
• Sized at 1-1/4 x 1-1/2” (32 x 38mm), ideal for MicroValve 3 abrasive metering valve
• Included plunger seal to prevent abrasive media from leaking
• Polyurethane sleeve for protecting the plunger against wear and tear
• Included O-ring to effectively seal the valve and prevent leaks
• Ball seat for managing the flow of abrasive media
• Economical solution to prolong the lifespan of your MicroValve 3

• Service Kit for Pneumatic Control Valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve.

BlastOne stocks the Axxiom replacement parts you need to keep your valves operating. These are the MicroValve 2 pipe nipples.

• 31.75mm MNPT x 38mm MNPT, MPN 2127-007-10
• 38mm MNPT x 38mm MNPT, MPN 2127-008-10
• Hardened Steel for extended durability
• Genuine Schmidt / Axxiom Parts

• OEM Replacement Seals Kit for Thompson® Valve II XL™
• Replacement Seals / O-Rings only
• Schmidt® / Axxiom part # 2153-000-98

• Tried and proven deadman controls now available in a trigger style option
• Reduces strain on the operator
• Great for smaller nozzles #3 to #6
• Available as electric or pneumatic deadman controls
• Sold Individually
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

The industry-proven Schmidt TeraValve™ XL metering valve is revolutionary in its ability to provide high performance abrasive metering while boasting an enhanced service life.

• Durable.  The XL (extended life) technology offers more durability – even when blasting with aggressive media like aluminum oxide or steel grit.
• Convenient.  No special modifications are required to swap an older pressure-hold valve (like the Thompson) to a Tera. Even older pressure-release pots can be upgraded with a TeraValve Retrofit Kit, as long as there is at least 6″ clearance from the bottom of the pot.
• Preferred.  BlastOne provides the Tera Valve as standard equipment on all new blast equipment.  In addition, we use them in our own rental fleet.

Ensure the efficiency of your Schmidt® Blast Pot with the “Pop-Up Seating Ring” (SKU: BAP2100011). This Polyurethane ring is specifically designed for 3.5-20 cu.ft S-Series Blast Pots, ensuring a precise fit and optimal performance. 

Polyurethane Pop-Up Seating Ring

• 2100-011
• Large Pop-Up Seating Ring for 3.5-20 cu.ft S-Series Blast Pots
• RING ONLY

• Replacement OEM Plunger for TeraValve™ XL
• Tungsten Carbide for long life
• Schmidt® / Axxiom part # 2130-000-06
• NOTE – this is included in the Extended Rebuild kit GV213000099

• Suits Schmidt’s Small blast pots
• Hemispherical Pop-up valve seals off the pot when pressurized
• Shaft is embedded in the urethane head
• Sold Individually
• Buy Pop-up Seating ring separately BAP2100000
• Genuine Parts – Manufactured by Axxiom Manufacturing/Schmidt®

• OEM Replacement Urethane Sleeve suit Thompson® Valve I
• Urethane composition means it’s high-wear in normal applications, but sometimes the only option for a recycled abrasive or super fine abrasive
• Schmidt® / Axxiom part # is 2149-100-13

• Repair Kit for Thompson Valve 2
• Complete Repair kit for Thompson Valve 2 including the Tungsten Carbide Plunger
• Schmidt abrasive blasting/Axxiom Manufacturing part number 2152-000-99

• OEM Replacement Sleeve for Thompson® Valve I
• Tungsten Carbide construction means you get significantly improved wear life
• Not suited to superfine medias, or abrasive being recycled without a proper recycler – suggest Urethane Sleeve (GV214910013)
• Schmidt® / Axxiom part # 2149-000-13

• OEM Replacement Plunger suits Thompson® Valve I
• Wear surface is made of Tungsten Carbide for increased life
• Schmidt® / Axxiom part # is 2149-000-07

• OEM Replacement Plunger Seal for MicroValve™ 1 / Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-06

• Replacement Piston for Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-05

• OEM Replacement Spring for Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-03

• OEM Replacement Cap for Thompson® Valve 1
• This is the part that bolts to the body and the knob bolts into at the top
• Schmidt® / Axxiom part # 2149-000-02

• OEM Replacement Knob for Thompson® Valve I
• These knobs are Red
• Schmidt® / Axxiom part # 2149-000-01

• The original Thompson® Valve invented by Bob Schmidt
• Suits a pressure hold system, which retains the pressure in the blast pot, until the deadman handle is depressed
• Meters the flow of blasting grit, garnet abrasive sand
• 3 Nipple size configurations:
  • 1 ¼” (32 mm) x 1 ¼” (32 mm)
  • 1 ½” (38 mm) x 1 ½” (38 mm)
  • 2″ (50 mm) x 2″ (50 mm)
• Threaded-plunger metering design with air actuated operation
• The Thompson® Valve is suitable for use with all approved blasting abrasives
• Fits most sand blast hoppers, blast pots or abrasive blasting machines
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

From gaskets and crabs to covers and bolts, BlastOne has all the replacement parts you need to repair the Handhole / Manway access panels for Axxiom / Schmidt blast pots.

• Special note:  Be sure to try out the SureFit™ Handway gasket for the 6.5 pot.  It makes installation much easier & faster.  Lasts longer too!
• Note:  Versions of these access assemblies have changed over the years.  If any doubt which version you need, send us the model year and serial number of your blast pot to confirm the correct part before ordering.

• Suits Pressure Release blowdown systems like the Combo/Micro Blast Pot
• Sound levels are quieted to 110 dB (at 100 psi)
• Safely reduces abrasive particles that can escape during blowdown
• Sold as a Field Assembly Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Attaches to Combo Valve)
  • Any required fittings
  • Does not include a new Blow Down hose
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt

• The most versatile, easy-to-regulate dry blast machine on the market
• 10-150psi blasting pressure range
• With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate “metering” of hard-to-flow abrasives like Soda and fine Garnets
• With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types – fine to coarse
• With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
• G2 pneumatic deadman control, 55′ twinline control hose, 55′ water line with wet blast attachment for dust suppression included with purchase
• Genuine Products – Manufactured by Axxiom Manufacturing – Schmidt®

• Seals Kit for MicroValve III
• Replacement Seals Kit for Old Style MicroValve
• Schmidt abrasive blasting equipment/ Axxiom Manufacturing part number  2125-100-98

• The Premium Industry Standard Air Dryer
• Uses Deliquescent tablets to absorb moisture from the blasting air
• Pneumatic Fan motor with Easy Maintenance
• Galvanized Desiccant Tank lasts 5x longer then all competition
• Select size based on the CFM of your compressor
• Come fitted with 4-claw fittings
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing
• ACSD250 / ADS250, ACSD400 / ADS400, ACSD750 / ADS750, ACSD950 / ADS950, ACSD1200  / ADS1200, ACSD1600 / ADS1600

• ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
• This System changes the depressurization flow of the air in the blast hose
• Allows a 60 metre blast hose to depressurize in less than 1 second
• Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
• Saves Seconds – Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
• Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-25
• Vibration Disc for Thompson Valve 2

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-04
• Piston Seal for Thompson Valve
• Replacement Piston Seal for Old Style Thompson Valve

• Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
• Designed to handle the harshest blasting environments known
• Will handle up to a 3/4″ blast nozzle
• Will work with any abrasive, including very fine/dusty abrasives
• Most rugged and reliable valve for any application
• Sold Individually
• Genuine Parts – Made in USA by Schmidt / Axxiom Manufacturing

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-21
• Replacement O-Ring for Tungsten Carbide Sleeve for Thompson Valve 2

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-14
• Replacement Body for Thompson Valve 2

• Base for Thompson Valve 2
• Replacement 1-¼ Base Nipple for Thompson Valve 2
• 2152-000-15 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-18
• Replacement Spring Retainer O-Ring for Thompson Valve 2

• Cylinder for Thompson Valve 2
• Replacement Cylinder for Thompson Valve 2
• 2152-000-09 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Use in place of discontinued item: GV215200006
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-500-06
• Plunger seal for Thompson Valve large bore
• Replacement black plunger seal for old-style Thompson Valve

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2130-000-98
• Replacement Parts Kit (Seals Only) for TeraValve XL

• Base For Thompson Valve 2
• Replacement 1-½ Base Nipple for Thompson Valve 2
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-11

• Tungsten Carbide Plunger for Thompson Valve 2
• Replacement Tungsten Carbide Plunger for Thompson Valve 2
• 2152-000-07 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Thompson Valve TC Insert
• Compatible: Thompson Valve Tungsten Carbide Sleeve
• Type: Service Kit
• Replacement Tungsten Carbide Insert for Old Style Thompson Valve
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-14

• 2152-000-16 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number
• Replacement Cap Gasket for Thompson Valve 2

• Suits Pneumatic Control Valve DM2229000
• Replacement Large O-Ring to ensure the piston seal is good
• Sold Individually
• Genuine Parts – Manufactured by Schmidt / Axxiom Manufacturing

• Suits Manual Blow Down Blast Pots – Thompson Valve or Tera Valve Style
• Complete Conversion Kit to reduce sound to 110 dB
• Handles any abrasive that may be escaping out of the blast pot
• Sold as a Field Assembly Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Goes on blast pot leg)
  • Blowdown Hose Assembly
  • Ball Valve and required fittings
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-99
• Repair Kit for Thompson Valve
• Complete Repair kit for Old Style Thompson Valve including the Tungsten Carbide Plunger

Abrasive blasting hopper lid and mesh screen

• • Lid and Screen Set designed to suit blast pots
  • Hole size 1/8” (3 mm)
  • Screen sieves foreign matter out of the abrasive
  • Lid keeps moisture, rain, dew, etc – out of the blast machine
  • Select the size to suit diameter of your blast pot 12″ 18″ 24″
  • Fit most portable blast machines, made by Schmidt abrasive blasting, Axxiom Manufacturing, clemco

• Pipe Nipple for Thompson Valve
• Replacement 1-¼ Pipe Nipple for Old Style Thompson Valve
• 2149-007-15 H Schmidt abrasive blasting equipment / Axxiom Manufacturing part number