Search: blast nozzle

Standard Tungsten Carbide (aka TVP) blast nozzles are widely used and are a lower-cost, basic general-purpose nozzle with the following characteristics: Click for Buying Guide

• Performance characteristics:
  • Venturi design offers up to 40% greater production than straight bore.
• Thread Types:
  • 32mm NPSM brass fine threads
  • 50mm aluminum contractor threads
  • Flange type (unthreaded, and attaches to a blast hose with a standard blast hose quick coupling instead of a nozzle holder)
• Orifice Sizes:  
  • Contractor & Fine:  3, 4, 5, 6, 7, 8, 10, 12
  • Flanged:  6, 7, 8, 10, 12
• Liner: 
  • Tungsten Carbide, provides longer life than disposable alternatives for industrial blasting projects
• Jacket:  
  • Contractor and Fine thread versions have poly jacket
  • Flanged type is an all-aluminum jacket
• Design:
  • 25mm throat entry for #3 and #4 sizes
  • 32mm throat entry, for all other sizes
• Additional notes:
  • Lowest up-front cost of any industrial blast nozzle.
  • Higher weight and shorter lifespan than premium silicon nitride versions.
  • Lower total cost of ownership, higher performance, and/or improved ease-of-use may be achieved with one of the premium nozzle options.  See You May Also Like below.

Adapts a contractor thread nozzle to a wet blasting nozzle.  More control than with a halo nozzle.

• Injects water internally into the abrasive / air stream
• Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
• Includes needle valve to optimize mixture
• Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow

• Suit Blast and Vac Workhead VCBV200
• Fine Thread Nozzle Holder
• Connects Blast hose to the nozzle and the workhead.
• You can not use the Workhead without this
• Sold Individually

Click for Buying Guide

• Industry Leading Blast Nozzle
• SiNi II grade silicon nitride liner
• Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
• Vacuum molded urethane thread – will not ‘jam’ in blasting nozzle holder
• Half the weight of conventional tungsten carbide abrasive blast nozzles
• 2″ UNC (50mm) coarse Contractor thread
• 1¼” (32 mm) wide throat entry, long venturi – except Ultra-3 & Ultra-4 have 1″ (25 mm) throat entry

Short nozzles with straight bore are made for close-range spot blasting. The blast pattern is small, making it ideal for cleaning small areas, railings, etc. Other details as follows:

• Fine thread, 1-¼” – 11-½” NPSM
• Available in sizes from #3 to #8
• Tungsten carbide liner

Maximize efficiency with the RotorBlast Internal Pipe Blasting Tool (SKU: IPC1000). Designed for pipes from 8″ to 36″ ID, this twin-nozzle, spinning blast head ensures thorough sandblasting, offering optimal results. 

• ADJUSTABLE CENTERING CARRIAGE SOLD SEPARATELY – IPC1200
• Twin nozzle, spinning internal pipe blasting system
• For sandblasting pipes 8″ to 36″ (200 mm – 900 mm) internal diameter
• Nozzles sold separately.  Note the following:
  • 2 nozzles are required for this unit.
  • Use the BNAT nozzles for use in pipes from 8″ to 11″ ID.
  • Use the BNASB nozzles for use in pipes from 12″ to 36″ ID.
• Note:  ID blasting equipment requires significant maintenance – contact us for details.

The SnakeBite XP is the high-performance nozzle used in the highly successful SnakeBite XQ silenced configuration.  As the XP uses a simple bump cap on the end (instead of the silencer), it does not have the noise and thrust reduction of the XQ. It is very fast and exceeds the performance of our hyper nozzle.  Details as follows:

• Performance:
  • The advanced modeling used when designing this Snakebite XP hyper nozzle has taken blasting performance to a whole new level.  The refined internal geometry coupled with the non-silencing bump-cap produces very fast cleaning speed indeed.
• Liner:
  • The new internal geometry when combined with the silicon nitride composition extends usable life greatly.
• Jacket:
  • Anodized aluminum with ergonomic shape makes for a very comfortable grip.
• Sizes:
  • Available in the following orifice sizes:  6, 7, 8, & 10
  • Overall length varies from 10″ to 13″, depending on orifice size.
• Thread type:
  • Available in standard 2″ Contractor thread only.  (See You May Also Like nozzle thread adapters below if you want to use with fine thread nozzle holders.)

 Note:  Inquire for details about our free trial offer.

• Replacement bolt for the Internal Pipe 360° Blast Nozzle
• Sold – individually

The “Jumbo RotorBlast Blast Nozzle 5/16″ (SKU: BNASB15M) is a high-quality tungsten carbide nozzle, perfectly designed for RotorBlast internal pipe blasting with a 5/16” (8.0mm) orifice and medium thread.

• Blast Nozzle Jumbo RotorBlast
• Jumbo RotorBlast Blast Nozzle Tungsten Carbide, 5/16″ (8.0mm) Orifice, Medium Thread

Introducing the Supersonic Tungsten Carbide Blast Nozzle (SKU: P-BNATLW) with a 1 ¼” throat entry and durable aluminum jacket – a contractor’s top choice for blasting efficiency.

• 2″ UNC (50 mm) coarse Contractor thread
• 1 ¼” (32 mm) wide throat entry, long venturi
• Tungsten carbide liner
• ‘The Original’ Contractor favourite
• Standard weight aluminum jacket and thread
• Use HF G32P nozzle washers

• Hold*Blast is a cost-effective flash rust prevention solution
• Environmentally safe and compatible with all coatings
• It is used to “Hold the Blast” to allow primer to be applied
• Added in low concentration (2-10%) to the ‘blast water’ to prevent flash rusting
• Ideal to mix with your water when wet blasting
• Compare to Hold*Tite 102!
• Sold in 5-gallon pails
• 32 pails ship on 1 pallet

WATER INDUCTION BLAST NOZZLE

• Wet Blast Nozzle
• WIN Nozzle for wet abrasive blasting
• 2″ UNC (50mm) coarse Contractor thread
• 1¼” (32 mm) wide throat entry, double venturi

The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.

• For testing air pressure at the nozzle
• Test kit includes:
  • Liquid filled stainless steel pressure gauge with dual pressure & efficiency scale
  • Four needles and instructions
• Protective leather bound case

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Covers up to 45 m² / 485 ft²  per hour
• Accommodates up to 16 nozzles
• Compatible for use on upside down, vertical, or horizontal surfaces
• Enclosed UHP water blasting and washing
• Up to 5X faster than manual work
• Blasts an incredible 15.5″ (400 mm) cleading width
• Wirelessly controlled – keeps workers out of harm’s way
• Reconditioned older VertiDrive models may be available for sale

Different packages available

• Replacement Tungsten Carbide Deflector Tip for BNATC360C internal pipe blasting nozzle.
• Ensures optimal blasting efficiency and durability.

• Compatible with a wide range of blast pots
• Digital display of actual blasting time for individual blast outlets
• Allows you to determine productivity, production rates, assisting project costings, job estimates and scheduling maintenance for common wear items
• System available to run off pneumatic and electric deadman controls
• Triggered instantly by the deadman signal, so you get actual blasting hours
• Options available for single and multiple outlets.

Nozzle holder for blast hose 

• Connects the blast nozzle to the blast hose
• Choose your blast nozzle thread type;
  • 3/4″ Medium Mitey-Mite Thread
  • 1-1/4″ Industrial Fine Thread
  • 2″ Coarse Contractor Thread *Contractor Favourite*
• Reference the table below for the size to fit your blast hose
• Available in Nylon, Brass or Aluminium
• Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3

• Superior quality, lightweight and highly flexible sandblasting hose
• Blast Hoses have anti-static, natural rubber liner
• Rated to minimum 175 psi – 3:1 safety factor
• Made to BlastOne Blast Hose specifications
• Robust TuffRap™ outer blasting hose cover
• Light Wall Blast Hose
• Commonly known as supa hose or supahose
• Fit with your choice of nozzle holder and couplings
• Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request

• Specified capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• 1600 cfm Airprep mounted directly on the front of the MegaBlaster Bulk Blaster
• Comes with 2 Thompson Valve metering valves, up to 4 outlets possible
• Skid Mounted Bulk Blast Pot

Click for Buying Guide

• 2″ UNC (50mm) Contractor thread
• 1¼” (32mm) wide throat entry, extra long venturi
• Extra long venturi increases performance by up to 30%
• SiALON II grade silicon nitride liner
• Aluminum jacket and thread with urethane cushioning
• New feature: Non-slip knurl

BULKBLASTER / MEGABLASTER

• Specified capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• 1600 cfm Airprep mounted directly on the front of the MegaBlaster
• Comes with 2 Thompson Valve metering valves, up to 4 outlets possible
• Skid or Trailer Mounted
• Hybrid Bulk Blaster with built-in Air Drier

• Bull Hose Coupling for Sure lock
• Sure lock bull hose fitting – 2″ (50mm) Hose tail

FOR RENTAL OR PURCHASE

• Combination Skid – MistBlaster and AirDryer Package
• Capable of doing wet and dry blasting – ultimate flexibility for any job!
• 6.5 cu. ft. Schmidt Blast Pot with MistBlaster Conversion
• Teravalve XL Abrasive Metering Valve
• 400cfm Moisture Removal System (Select Deliquescent Air Dryer or Squat AfterCooler)
• 189 liter water tank & pump
• Select if you do or don’t want the Operator Accessories Kit (RPB Breathing air filter and  GX4 CO Monitor, 5cm Bull hose, 3.175cm SupaFlex Blast Hose, Nova 3 Blast Helmet, and #6 Blast Nozzle)

BULK BLASTER & MEGA BLASTER

• Bulk Blast Pot capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• Ultimate Bulk Mega blast machine for large onsite blasting contractors
• Comes with 4 Thompson Valve metering valves
• Mounted on a highway certified trailer

BULK BLAST POT

• Blast Bulk Pot capacity 75 cu ft / 2100 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 5 tonne Bulk Blaster
• Ideal for mounting to the back of a truck
• Comes with 2 Thompson Valve abrasive metering valves, can have upto 4
• Skid Mounted Mega Pot

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Blasting Robot
• Compatible for use on horizontal, overhead, and vertical surfaces
• Can operate upside down on steel surfaces via magnets
• Interchangeable applications (washing / hydroblasting / abrasive blasting)
• Wirelessly controlled – keeps workers out of harm’s way
• Strategically designed for compact working radius
• Reconditioned older VertiDrive models may be available for sale

Different packages available

Click for Buying Guide

• This nozzle gives you a very large blast pattern which is ideal for quick brush blasting of large areas
• Made with silicon nitride liner, urethane jacket, and brass contractor thread
• Nozzle is light but extremely durable, making it very blaster friendly.
• 2″ UNC (50mm) Contractor thread
• 1-1/4″ (32mm) wide throat entry, extra long venturi
• Sold Individually

• Complete Range of blast and vacuum work heads and equipment
• Typically work best on flat surfaces, custom units are available upon request
• Largest workhead available – Large with Wheels
• Pistol Grip – *Most Popular* easiest to hold onto
• Right Angle – Designed to get into smaller areas
• Standard Unit – the Original Blast and Vac head
• aka: Blastnvac 6 Head
• Choose your style

FAN BLAST™ Fan Pattern SiALON Blast Nozzles give wide, even blast patterns, ideal for sweep blasting. Different variations include:

• 2″ UNC (50mm) coarse contractor thread
• 1-1/4″ ( N.P.S.M.) fine industrial thread

Also available with tungsten carbide liner – enquire for price and lead time.

At present, this nozzle is available only with a #6 orifice.  An alternative nozzle type for this application, which is available in multiple orifice options, is the Raptor / Bazooka nozzle.

BLASTHOSE

• High quality, long lasting sandblasting hose
• Blast Hoses have a thick, anti-static, natural rubber liner
• Made to BlastOne Blast Hose specification
• Rated to minimum 175 psi – 3:1 safety factor
• Robust TuffRap™ outer blasting hose cover
• Heavy Wall Blast Hose
• Recommended for use as an extension hose
• Fit with your choice of couplings
• Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.

The latest innovation in deadman safety technology from Axxiom is the BAABS (Blasting Accessories and Assist Bracket System). Intended to be the safest deadman on the market, it mechanically prevents inadvertent activation.  The Schmidt BAABS deadman is such a leap forward in safety technology that Axxiom provides them as standard equipment with most new blast pot or valve retrofit purchases.*

All BAABS use the Axxiom G3 trigger deadman configurable as either electric or pneumatic.

All BAABS units are capable of being fitted with the BAABS blast light for improved vision in dim or dusty environments.  (Note:  When the light is used with the Subcompact BAABS, there is not room for the thrust brace.)

*The standard configuration provided with new equipment is the Compact size.  See Product Description tab for all size options.

• Replacement silencers for the SnakeBite family of blast nozzles
• Up to 45% less operator fatigue
• Up to 16dB noise reduction
• 2 versions available
  • Standard Pressure Silencer effective between 90-110 psi
  • Low Pressure Silencer effective between 70-90 psi

Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:

• 3/8″ NPT Thread in either Male or Female configuration
• Male version has brass threads and requires a minimum opening clearance of 1″.  This version is 1-7/8″ long.
• Female version has steel threads and requires a minimum opening clearance of only ¾”.  This version is 3-1/8″ long.
• These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
• Angle options include:
  • 45° & 60° forward blast
  • 90° right angle blast
  • 135° reverse blast
• Some options available in double, triple or quad orifices in addition to single.
  • Note:  Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
• Stock version uses tungsten carbide lining.

Note:  Due to the angled blast stream, these nozzles will wear more quickly than traditional versions.  For larger projects, we offer long-life Roctec nozzle linings by special order, with a minimum order quantity of 5.  Contact us for further details.

Nozzle gaskets (aka nozzle washers) help reduce static electricity and nozzle wear.  Below is information on the various types:

• Brass or Aluminum nozzle holders.
  • For Medium thread (19mm), use HFGFBSP / NW-1.
  • For Contractor thread (51mm), use HFGFBLP / NW-3.
  • For Fine thread (32mm), use HFGFBMP / NW-4.
• Nylon nozzle holders.
  • For 25mm (Narrow) Nozzle throat, use HFG25P / NW-25.
  • For 32mm (Wide) Nozzle throat, use HFG32P / NW-32.

Note:  All nozzle washers are priced per pack of 10.

• Curved “Banana” Blast Nozzle
• Made from Boron Carbide which is the longest lasting material used for blast nozzles
• Size listed is a #6, which is 3/8″ internal diameter
• Sizes #4 and #5 are available, but not very common – call to order
• Has a Medium 3/4″ Thread – Requires a special nozzle holder adapter
  • Use a HFNHA20 Medium Thread to Contractor Thread Adapter
• Sold Individually

SCHMIDT THOMPSON VALVE 2

• Abrasive Metering Valve
• Meters the flow of blasting grit, garnet abrasive sand
• Rugged, simple, bolted construction
• 1 ¼” (32 mm) thread abrasive inlet port
• Features 1” (25 mm) thread side-cleanout port
• Heavy duty tungsten carbide sleeve
• Specify air connection size
• Threaded-plunger metering design with air actuated operation
• The Thompson II Valve uses HF BTC blast coupling – not included (order separately)
• The Thompson Valve 2 is suitable for use with all approved blasting abrasives
• Fit most sand blast hoppers, blast pots or abrasive blasting machines

• Used for blasting pipes 3″-12″ Internal Diameter
• Uses tungsten carbide deflection head and 1/2″ throat nozzle
• Select the unit that will best match your Air Supply:
  • 1/2″ Throat Nozzle: 250 cfm
  • 5/8″ Throat Nozzle: 400 cfm
• Neither of these packages come with a transport carriage – Order Separately
  • Collar and Button 3″-5″ Pipes
  • Scissor Type 5″-12″ Pipes
• Successful Pipe Internal Projects require some specialist knowledge – contact our team for assistance

Short venturi nozzles are made for close-range blasting. The venturi allows the widest possible pattern in limited space environments. Other details as follows:

• Available in either Contractor thread (50mm) or Fine thread (1-¼”)
• Available in orifice sizes from #3 to #12
• Tungsten carbide liner
• Multiple jacket types available

Call / chat / email us if the version you are looking for is not shown.

The world’s quietest blast nozzle!

• Up to 16dBA noise reduction
• Up to 45% less fatigue compared to standard blast nozzles
• Improved nozzle geometry
• New technology quick-connect nozzle silencer
• Durable and lightweight Silicon Nitride nozzle and silencer liner
• Slimline ergonomic nozzle jacket
• Standard contractor nozzle inlet thread
• Designed to optimise the use of GMA garnet
• 2 versions available
  • Standard Pressure Nozzle effective between 90-110 psi
  • Low Pressure Nozzle effective between 70-90 psi
• FREE TRIAL AVAILABLE

Act quick! Limited supply.

Ensure the smooth operation of your Pneumatic Response Deadman Handle with the “Response Deadman Service Kit” (SKU: DM226300299). This complete kit features genuine parts by Schmidt/Axxiom Manufacturing for efficient in-field repairs.

• Service Kit for Response Deadman
• Service Kit for Pneumatic Response Deadman Handle

AVAILABLE FOR RENTAL OR PURCHASE

• #1 Nozzle Mounted Blast Light Preferred by Blasting Contractors
• Has 6 LED’s giving 1,325 lumens light output blast light
• Voltage range – 120 v AC or 12-28 v AC/DC
• Long lasting – the LED blast light lamps will last 20x the life of a halogen globe
• Can be hose mounted or hand-held
• Lights can be repaired but require sending them to factory

The BAABS deadman assembly works on all sizes of blast hose.  To facilitate the various hose diameters, a hose adapter set is required.  Each adapter set includes 2 grippers (2 sets are used per BAABS) and is offered in the following sizes:

• M1, for HE1 nozzle holder (25mm whip OR 19mm 4-ply hose)
• M2, for HE2 nozzle holder (31.75mm whip OR 25mm 4-ply hose)
• M3, for HE3 nozzle holder (38mm whip OR 31.75mm 4-ply hose)
• M4, for HE4 nozzle holder (38mm 4-ply hose)

NOTE – set sizes M2, M3, and M4 are INCLUDED with each BAABS system purchase.  Size M1 available at additional cost.

Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type. Boron Carbide is the longest life version, but not available in all configurations.  Polyurethane, steel, aluminum, etc. are also available and are lower in cost.

• Available configurations:
  • Contractor 50mm Thread Nozzle Holders to:
    • 20mm Medium Thread nozzles
    • 32mm Fine Thread nozzles
    • Flange nozzles
  • Fine 32mm Thread Nozzle Holders to:
    • 20mm Medium Thread nozzles
    • 50mm Contractor thread nozzles.  This is a BlastOne Exclusive!

The 360° internal pipe blasting nozzle is ideal for use when blast cleaning small interior pipes ranging in size from 65 – 125mm in diameter.

• Wear-resistant angle type blasting nozzle
• Made from tungsten carbide
• Up to 400 hours of blast life
• Aluminum thread, 50mm for NHP nozzle holder
• Aluminum jacket

• Blast Nozzle Jumbo RotorBlast
• Jumbo RotorBlast Blast Nozzle Tungsten Carbide, 3/8″ (9.5mm) Orifice, Medium Thread

• Pins: 2; Volts: 12v; Watts: 20W; Compatible: Brite-Blast nozzle light
• Bulb for Halogen
• Replacement Halogen Bulb for 12v Blast Light BL3070 – Bulb only

• Comes with with Abrasive Pick-Up Tube and Hose
• Comes with ¼’ Airjet and ½’ nozzle
• Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance

• For attaching couplers and nozzle holders to blast hoses
• Used in conjunction with a small amount of silicon to install couplings
• Domehead or Countersunk
• SEE Screw Selection CHART in Additional Information below for proper sizing
• Sold in packs of 200

• 2″ UNC (50mm) coarse Contractor thread ‘C’ or 1 1/4″ NPSM (32mm) Fine Industrial thread ‘F’
• Square thorat entry, venturi
• Tungsten carbide liner
• Urethane jacket, brass thread
• Large square blast pattern – less overlap when blasting
• Alignment ridges on jacket

• 3/4″ NPSM (20mm) ‘M’ thread
• 1/2″ (13mm) throat entry
• Straight bore 
• Tungsten carbide liner
• Aluminum jacket and thread
• Use HF GFBS-P nozzle washers (1 included) 

• Pneumatic Complete Retrofit kit includes:
• Triple-line coupled remote control hose
• Control hose connections for air supply
• Auto air valve and Thompson Valve II metering valve
• Pneumatic push-pull abrasive on-off switch
• Response deadman handle

The biggest revolution in Water Jetting!

New precision engineered material grade tetraCORE™ diamond for optimised productivity and reduce operating cost for water jetting projects.

Experience 10-15 times longer life than sapphire nozzles! tetraCORE™ diamond nozzles ensure:

• Up to 60,000 psi operating pressure
• Zero ID edge degradation over use
• Premium jet stream coherency & integrity
• Optimised jet stream length and consistency
• Maximised uptime and productivity
• 100% testing of all nozzles prior to shipping

• Ideal for blasting recesses, pipe internals, behind angles, etc.
• 2″ UNC (50mm) coarse Contractor thread ‘C’ or 1 1/4″ NPSM (32mm) Fine Industrial thread ‘F’
• 3/4″ (20mm) throat entry
• 45° single or triple (equi-spaced) side outlets
• Tungsten carbide liner
• **Triple orifice nozzles have triple air & abrasive consumption!

• Premium blast hose fitted with couplings and nozzle holder
• We have many ways to fit a blast hose
• For a Whip hose we recommend you use 2Ply type
• Most common composition is Aluminum Coupling with Contractor Thread Nylon Nozzle holder
• Fitted and Quality Controlled by BlastOne Trained Staff

• 3/4″ NPSM (20mm) ‘M’ thread
• 1/2″ (13mm) throat entry
• 45° single or triple (equi-spaced) side outlets
• Tungsten carbide liner
• **Triple orifice nozzles have triple air and abrasive consumption!

Upgrade your Combo valve system with the Aluminum Nozzle Holder & Blow Down Hose Adapter (SKU: HFANHE1). Expertly designed for a secure fit and built to last, it’s perfect for coupling with the BH20 replacement hose.

• Blowdown Hose Adapter
• Works with Combo valve system
• 1-1/4″ NPS Thread
• Use BH20 for blow down replacement hose

• The original Thompson® Valve invented by Bob Schmidt
• Suits a pressure hold system, which retains the pressure in the blast pot, until the deadman handle is depressed
• Meters the flow of blasting grit, garnet abrasive sand
• 3 Nipple size configurations:
  • 1 ¼” (32 mm) x 1 ¼” (32 mm)
  • 1 ½” (38 mm) x 1 ½” (38 mm)
  • 2″ (50 mm) x 2″ (50 mm)
• Threaded-plunger metering design with air actuated operation
• The Thompson® Valve is suitable for use with all approved blasting abrasives
• Fits most sand blast hoppers, blast pots or abrasive blasting machines
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

• Lens For Blast Light
• Lens: 2″ (50mm); Compatible: Blast Light
• 2″ Replacement Lens for BL3070 Blast Light (Nozzle Light)

Stainless Steel Shot

• Manufactured chronital stainless steel shot abrasive
• Can be recycled many times
• Stainless Steel Abrasives are also used in applications where there can be no ferrous contamination
• Used mainly in an air-blast application to create a specific desired finish or where a non-ferrous abrasive is required
• Sharp edges gradually round over as it wears
• Packed in 25kg bags
• Made by Vulkan Shot
• Grittal Stainless Steel Grit also available

• Surelock Coupling Gaskets
• Surelock Coupling Gaskets – Pack: 10

• Installed at blast machine inlet for final stage moisture droplet removal before air enters blast machine
• Tangential flow and elementless design
• Minimal pressure loss for peak blasting productivity
• Supplied with manual drain valve
• Optional autodrain accessory available
• Male threaded inlet and outlet ports
• Inlet fitting or ball valve not supplied – order separately
• Specify Size – 250cfm or 400cfm, based on the size of your blast nozzle and compressor
• Includes internal stainless steel coalescer

• IPC1002 RB-1 Replacement Rotating Head
• For IPC1000 RotorBlast
• Note:  This item is also included in Spare Parts Kit, IPC1099
• Note:  This item does not include nozzles.  See part IPC1000 for nozzle recommendations.

• 2152-000-10 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number
• Replacement Urethane Seat for Thompson Valve 2 when using a Tungsten Carbide Plunger

• Base For Thompson Valve 2
• Replacement 1-½ Base Nipple for Thompson Valve 2
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-11

• ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
• This System changes the depressurization flow of the air in the blast hose
• Allows a 60 metre blast hose to depressurize in less than 1 second
• Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
• Saves Seconds – Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
• Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
• Material: Double-lipped rubber
• Compatibility:
  • PCG-1: 3/4″ ID and Smaller Blast Hose
  • PCG-2: 1″ ID Blast Hose
  • PCG-3: 1-1/4″ ID and Larger Blast Hose
• Sold as a pack of 10

Type II, a thermoset Urea Formaldehyde, meets the specifications of MIL-P-85891A.

The finished product contains no inorganic fillers & is treated with an anti-static agent. Type II Urea is commonly used as an abrasive, blast media & filler.

Plastic media – Type II (urea), size 30/40 mesh MIL-P-85891 approved

Other sizes available

STANDARD MESH SIZES
8/12, 12/16, 12/20, 16/20, 20/30, 20/40, 30/40, 40/60, 60/80

Non Milspec Material also available

• Tungsten Carbide Plunger for Thompson Valve 2
• Replacement Tungsten Carbide Plunger for Thompson Valve 2
• 2152-000-07 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Repair Kit for MicroValve
• Replacement Repair Kit for MicroValve III
• Schmidt abrasive blasting equipment/ Axxiom Manufacturing part number 2127-100-99
• Complete Rebuild Kit for MicroValve 2 Schmidt / Axxiom part # 2127-100-99 Includes: GV214950006, GV212700005, GV701100506, GV212700012, GV212700015, and GV212710008

• Thompson Metering Valve II lasts up to 10 times longer than any other valve, due to its unique engineering
• Designed to handle the harshest blasting environments known
• Will handle up to a 3/4″ blast nozzle
• Will work with any abrasive, including very fine/dusty abrasives
• Most rugged and reliable valve for any application
• Sold Individually
• Genuine Parts – Made in USA by Schmidt / Axxiom Manufacturing

• Conventional bleeder-type deadman control handle
• 1/4″ (6mm) (supply) x 1/8″ (3mm) (return) threaded connectors
• Large lever design
• Use only with equipment designed for bleeder-style handles – DO NOT use with Combo or Thompson Valves

The field repairable NLB8488 can significantly improve UHP system productivity. It uses a quick-change cartridge valve that is similar to NLB 286 series lances and foot controls. User-friendly features include:

• 60-second cartridge replacement
• Switch from 1-lance to 2-lance operation with a simple nozzle change
• Rounded frame for easier carrying

Hose assembly is required to connect a rotating lance to a Bi-Mode valve.

Note: This Bi-Mode Valve has been reconditioned and includes a 90 day warranty.

BlastOne UBD24M-50C HP Water Blast unit rated for operation at up to 350 bar/5,000 psi, 21 LPM. Includes the following features:

• Kohler 24HP Diesel Engine
• Hawk HP Triplex Pump
• Heavy duty Hose Reel
• Stainless Water Header Tank with low level shut down
• Heavy duty industrial water filter assembly
• Large Fuel Tank
• HP 400 Bar Cleaning Gun and Lance with fan nozzle
• 20M HP Hose Assembly