Search: blast hose

• Bull Hose Coupling for Sure lock
• Sure lock bull hose fitting – 2″ (50mm) Hose tail

The BAABS deadman assembly works on all sizes of blast hose.  To facilitate the various hose diameters, a hose adapter set is required.  Each adapter set includes 2 grippers (2 sets are used per BAABS) and is offered in the following sizes:

• M1, for HE1 nozzle holder (25mm whip OR 19mm 4-ply hose)
• M2, for HE2 nozzle holder (31.75mm whip OR 25mm 4-ply hose)
• M3, for HE3 nozzle holder (38mm whip OR 31.75mm 4-ply hose)
• M4, for HE4 nozzle holder (38mm 4-ply hose)

NOTE – set sizes M2, M3, and M4 are INCLUDED with each BAABS system purchase.  Size M1 available at additional cost.

Introducing the UltraFlex Twin Paint Spray Hose & Air Line Hose Sets (SKU: P-GR299). Enjoy tangle-free operations with this joint air & paint fluid hose. Rated for high pressures, available in standard lengths or made-to-order.

• Ultra flexible – easy to handle
• 200 psi air pressure rated, 85 psi fluid pressure rated
• Color coded Siamese hose
• Solvent compatible fluid hose liner
• Coupled with paint, ¼” air fittings
• Standard 25 ft (7.5 m) or 50 ft (15 m) lengths
• Hose also available in made-to-order lengths and bulk – Call us!

• Coupling for Sure lock
• Surelock Coupling – 2″ BSP(F)

• Compatible: RPB Nova 3 Blast Helmet Respirator
• Breathing air tube which transfers the air from the climate control tube to the blaster’s Helmet Respirator
• It is very flexible to allow the blaster maximum movement
• It silences the incoming air substantially to prevent hearing damage to blasting operators

Ensure safety with the Safety Whipcheck for Hose Connections (SKU: P-HFSCA). Designed for hoses from ½” to 3½”, these steel-constructed whipchecks restrain hoses during unexpected disconnections.

• Use of a safety whipcheck restraint is mandatory on all hoses
• Whip checks are of steel construction
• HF SCA-1 cable suits hoses ½” to 2 ½”
• For use on Blast hoses (15 mm to 60 mm) OD
• HF SCA-2 cable suits hoses 2″ to 3½”
• For use on blast and bull air hoses (45 mm to 90 mm) OD
• Whip Checks restrains hoses in the event of a failure or accidental disconnection

Nozzle holder for blast hose 

• Connects the blast nozzle to the blast hose
• Choose your blast nozzle thread type;
  • 3/4″ Medium Mitey-Mite Thread
  • 1-1/4″ Industrial Fine Thread
  • 2″ Coarse Contractor Thread *Contractor Favourite*
• Reference the table below for the size to fit your blast hose
• Available in Nylon, Brass or Aluminium
• Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3

The Nut and Tail Connector (MPN: P-FMTN) is a durable, two-piece fitting designed specifically for AHR general-purpose air hoses used in blast equipment. Constructed with a swivel nut and female NPS long shank coupling, this connector offers versatile clamping options for secure, leak-free performance in pusher line assemblies and blast pots.

• MPN: P-FMTN
• Two-piece design: Hose tail to swivel nut with female NPS thread
• Material: Made from plated steel, not plated iron, for corrosion resistance
• Clamping options: Compatible with double bolt clamp or bandit clamp
• Gasket: Extra-thick gasket minimizes dislodgment risk
• Applications: Ideal for blast pot pusher lines and general-purpose air hoses

• Must be installed in all blast hose couplings for safety
• Stops the blast hose coupling rotating and disconnecting
• HF-CLP1 is the thin type lock pin (Pack of 25)
• HF-CLP2 is the thick type lock pin (Pack of 25)
• HF-CLP3 is the nylon coupling spring type lock pin (Pack of 10)
• HF-CLP4 is the multi-fit spring type lock pin (Pack of 25)

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Blasting rate up to 2 m² per hour.  Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
• Utilizes the TeraValve XL abrasive metering valve
• Compressed Air Requirement is only 185 cfm
• Has wheels and fork pockets for easy portability by hand, or by forklift.
• 100% compressed air powered – no electricity required
• Various workheads are available for flat surfaces, inside corners, outside corners, etc. – enquire for details.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

FOR RENTAL OR PURCHASE

• Combination Skid – MistBlaster and AirDryer Package
• Capable of doing wet and dry blasting – ultimate flexibility for any job!
• 6.5 cu. ft. Schmidt Blast Pot with MistBlaster Conversion
• Teravalve XL Abrasive Metering Valve
• 400cfm Moisture Removal System (Select Deliquescent Air Dryer or Squat AfterCooler)
• 189 liter water tank & pump
• Select if you do or don’t want the Operator Accessories Kit (RPB Breathing air filter and  GX4 CO Monitor, 5cm Bull hose, 3.175cm SupaFlex Blast Hose, Nova 3 Blast Helmet, and #6 Blast Nozzle)

BRS – Abrasive Blast & Recovery System

• Abrasive holding capacity of 0.3 cu ft / 8.5 liters
• Blasting rate up to 2.0 m2 per hour
• Compressed Air Requirement 185 cfm
• On wheels for easy access. Includes fork pockets
• Recirculating compact blast & recovery unit
• 100% compressed air driven – no electricity required

AVAILABLE FOR RENTAL OR PURCHASE

• #1 Nozzle Mounted Blast Light Preferred by Blasting Contractors
• Has 6 LED’s giving 1,325 lumens light output blast light
• Voltage range – 120 v AC or 12-28 v AC/DC
• Long lasting – the LED blast light lamps will last 20x the life of a halogen globe
• Can be hose mounted or hand-held
• Lights can be repaired but require sending them to factory

Blast hoses must be cut square before attaching a fitting to them. The use of hose cutters like these are recommended as using a saw or other process will not allow the fitting to seat properly, causing premature wear.

Replacement blades available.

Two sizes available:

HFKCT100 for hoses up to 2 3/8″ (60mm) OD.

HFKCT150 for hoses up to 3″ (75mm) OD.

• Complete Range of blast and vacuum work heads and equipment
• Typically work best on flat surfaces, custom units are available upon request
• Largest workhead available – Large with Wheels
• Pistol Grip – *Most Popular* easiest to hold onto
• Right Angle – Designed to get into smaller areas
• Standard Unit – the Original Blast and Vac head
• aka: Blastnvac 6 Head
• Choose your style

Click for Buying Guide

• Industry Leading Blast Nozzle
• SiNi II grade silicon nitride liner
• Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
• Vacuum molded urethane thread – will not ‘jam’ in blasting nozzle holder
• Half the weight of conventional tungsten carbide abrasive blast nozzles
• 2″ UNC (50mm) coarse Contractor thread
• 1¼” (32 mm) wide throat entry, long venturi – except Ultra-3 & Ultra-4 have 1″ (25 mm) throat entry

The latest innovation in deadman safety technology from Axxiom is the BAABS (Blasting Accessories and Assist Bracket System). Intended to be the safest deadman on the market, it mechanically prevents inadvertent activation.  The Schmidt BAABS deadman is such a leap forward in safety technology that Axxiom provides them as standard equipment with most new blast pot or valve retrofit purchases.*

All BAABS use the Axxiom G3 trigger deadman configurable as either electric or pneumatic.

All BAABS units are capable of being fitted with the BAABS blast light for improved vision in dim or dusty environments.  (Note:  When the light is used with the Subcompact BAABS, there is not room for the thrust brace.)

*The standard configuration provided with new equipment is the Compact size.  See Product Description tab for all size options.

• Coupling Sure lock
• BlastOne Surelock Coupling – 2″ BSP(M)

• Quickly connects one blast hose another blast hose
• Standard blast hose quick coupling claw, standard bore compatible with other couplings
• Reference the table below for the size to fit your blast hose
• Always use with coupling lock pins and blast hose whipchecks installed
• Available in Nylon, Brass or Aluminium
• Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6

• Compatible with a wide range of blast pots
• Digital display of actual blasting time for individual blast outlets
• Allows you to determine productivity, production rates, assisting project costings, job estimates and scheduling maintenance for common wear items
• System available to run off pneumatic and electric deadman controls
• Triggered instantly by the deadman signal, so you get actual blasting hours
• Options available for single and multiple outlets.

SCHMIDT THOMPSON VALVE 2

• Abrasive Metering Valve
• Meters the flow of blasting grit, garnet abrasive sand
• Rugged, simple, bolted construction
• 1 ¼” (32 mm) thread abrasive inlet port
• Features 1” (25 mm) thread side-cleanout port
• Heavy duty tungsten carbide sleeve
• Specify air connection size
• Threaded-plunger metering design with air actuated operation
• The Thompson II Valve uses HF BTC blast coupling – not included (order separately)
• The Thompson Valve 2 is suitable for use with all approved blasting abrasives
• Fit most sand blast hoppers, blast pots or abrasive blasting machines

AVAILABLE FOR RENTAL OR PURCHASE

• Tigerflex is the most preferred vacuum hose in the abrasive blasting market
• Has Anti-static properties to reduce static shock to the operators
• Special rubber compounds ensure high levels of abrasion resistance
• TigerFlex Vacuum hose is suitable for recovering and moving large quantities of abrasive abrasive blast media.
• Comes in many sizes, select your size

The “Jumbo RotorBlast Blast Nozzle 5/16″ (SKU: BNASB15M) is a high-quality tungsten carbide nozzle, perfectly designed for RotorBlast internal pipe blasting with a 5/16” (8.0mm) orifice and medium thread.

• Blast Nozzle Jumbo RotorBlast
• Jumbo RotorBlast Blast Nozzle Tungsten Carbide, 5/16″ (8.0mm) Orifice, Medium Thread

• Comes with with Abrasive Pick-Up Tube and Hose
• Comes with ¼’ Airjet and ½’ nozzle
• Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance

The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.

• For testing air pressure at the nozzle
• Test kit includes:
  • Liquid filled stainless steel pressure gauge with dual pressure & efficiency scale
  • Four needles and instructions
• Protective leather bound case

Standard Tungsten Carbide (aka TVP) blast nozzles are widely used and are a lower-cost, basic general-purpose nozzle with the following characteristics: Click for Buying Guide

• Performance characteristics:
  • Venturi design offers up to 40% greater production than straight bore.
• Thread Types:
  • 32mm NPSM brass fine threads
  • 50mm aluminum contractor threads
  • Flange type (unthreaded, and attaches to a blast hose with a standard blast hose quick coupling instead of a nozzle holder)
• Orifice Sizes:  
  • Contractor & Fine:  3, 4, 5, 6, 7, 8, 10, 12
  • Flanged:  6, 7, 8, 10, 12
• Liner: 
  • Tungsten Carbide, provides longer life than disposable alternatives for industrial blasting projects
• Jacket:  
  • Contractor and Fine thread versions have poly jacket
  • Flanged type is an all-aluminum jacket
• Design:
  • 25mm throat entry for #3 and #4 sizes
  • 32mm throat entry, for all other sizes
• Additional notes:
  • Lowest up-front cost of any industrial blast nozzle.
  • Higher weight and shorter lifespan than premium silicon nitride versions.
  • Lower total cost of ownership, higher performance, and/or improved ease-of-use may be achieved with one of the premium nozzle options.  See You May Also Like below.

Upgrade your Combo valve system with the Aluminum Nozzle Holder & Blow Down Hose Adapter (SKU: HFANHE1). Expertly designed for a secure fit and built to last, it’s perfect for coupling with the BH20 replacement hose.

• Blowdown Hose Adapter
• Works with Combo valve system
• 1-1/4″ NPS Thread
• Use BH20 for blow down replacement hose

• Brand: SureLock, 2-inch / 50mm Claw Clamp, ideal for sandblasting operations
• Secure hose to workpiece with two-jaw grip and a swiveling head
• Features a quick-release lever for easy operation
• Increases safety by preventing hose movement or disconnection during sandblasting
• Prevents operator contact with sandblasting media, protecting skin and eyes
• Enhances productivity by keeping the hose in place, allowing operators to focus on other tasks
• Reduces downtime by preventing hose damage
• SKU: FMSL50HC, a smart safety investment for those in the sandblasting industry

• Used for blasting pipes 3″-12″ Internal Diameter
• Uses tungsten carbide deflection head and 1/2″ throat nozzle
• Select the unit that will best match your Air Supply:
  • 1/2″ Throat Nozzle: 250 cfm
  • 5/8″ Throat Nozzle: 400 cfm
• Neither of these packages come with a transport carriage – Order Separately
  • Collar and Button 3″-5″ Pipes
  • Scissor Type 5″-12″ Pipes
• Successful Pipe Internal Projects require some specialist knowledge – contact our team for assistance

Skid Frame Only for Site/Pipeline Blasting Package.

• Standard Colour is BlastOne Grey
• Hose Hook included
• Suit BlastPot and AirPrep (not included)

• 10.0 cu ft Blast pot
• Manufactured by Schmidt to BlastOne unique specifications
• Single outlet Thompson Valve II abrasive metering valve
• Approx 670 kg garnet abrasive capacity
• Comes with pnuematic deadman handle and 20m of control hose
• Excellent for a blastroom application with 1-2 blasters
• Meets all Australian Standards

• Pneumatic Complete Retrofit kit includes:
• Triple-line coupled remote control hose
• Control hose connections for air supply
• Auto air valve and Thompson Valve II metering valve
• Pneumatic push-pull abrasive on-off switch
• Response deadman handle

• 20.0 cu ft Blast pot
• Manufactured by Schmidt to BlastOne unique specifications
• Dual outlet Thompson Valve II abrasive metering valves
• Approx 1350 kg garnet abrasive capacity
• Comes with two pneumatic deadman handles and two lengths of control hose
• Excellent for a blastroom application with 1-2 blasters
• Meets all Australian Standards

• Will vacuum upto 2 ton/hour
• Requires 350 cfm compressed air at 120 psi
• 1 Dust Collector Cartridge with filtration area of 21 m2
• Automatic Reverse Pulse Cleaning
• Use with 75mm vacuum hose

Ensure the smooth operation of your Pneumatic Response Deadman Handle with the “Response Deadman Service Kit” (SKU: DM226300299). This complete kit features genuine parts by Schmidt/Axxiom Manufacturing for efficient in-field repairs.

• Service Kit for Response Deadman
• Service Kit for Pneumatic Response Deadman Handle

• Xtreme Pump Suction hose for Xtreme, King, XL, NXT Pumps
• 1″ (25 mm) internal diameter
• 6′ (1.8 m) suction hose with male pipe thread on one end for the suction tube (use GR 197682 – not included)
• Quick Knockoff coupling for connection to the pump lower

• Suit Blast and Vac Workhead VCBV200
• Fine Thread Nozzle Holder
• Connects Blast hose to the nozzle and the workhead.
• You can not use the Workhead without this
• Sold Individually

AVAILABLE FOR RENTAL OR PURCHASE

• MegaFlow heavy duty air supply bull hose
• Fitted with your choice of industrial fittings
• Fitted by Trained and Certified BlastOne Technicians
• Rated to 300psi with 3:1 safety factor
• Always use with safety whipchecks

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2130-000-98
• Replacement Parts Kit (Seals Only) for TeraValve XL

Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type. Boron Carbide is the longest life version, but not available in all configurations.  Polyurethane, steel, aluminum, etc. are also available and are lower in cost.

• Available configurations:
  • Contractor 50mm Thread Nozzle Holders to:
    • 20mm Medium Thread nozzles
    • 32mm Fine Thread nozzles
    • Flange nozzles
  • Fine 32mm Thread Nozzle Holders to:
    • 20mm Medium Thread nozzles
    • 50mm Contractor thread nozzles.  This is a BlastOne Exclusive!

• For attaching couplers and nozzle holders to blast hoses
• Used in conjunction with a small amount of silicon to install couplings
• Domehead or Countersunk
• SEE Screw Selection CHART in Additional Information below for proper sizing
• Sold in packs of 200

• Will transform your blast pot into a pressure hold system
• Retrofit Kit includes:
  • Thompson Valve Series II with TC Sleeve
  • Full pusherline kit
  • Automatic air valve and all interconnecting hoses
  • Control line strainer and pneumatic control valve
• Response pneumatic deadman handle and Twinline

The industry-proven Schmidt TeraValve™ XL metering valve is revolutionary in its ability to provide high performance abrasive metering while boasting an enhanced service life.

• Durable.  The XL (extended life) technology offers more durability – even when blasting with aggressive media like aluminum oxide or steel grit.
• Convenient.  No special modifications are required to swap an older pressure-hold valve (like the Thompson) to a Tera. Even older pressure-release pots can be upgraded with a TeraValve Retrofit Kit, as long as there is at least 6″ clearance from the bottom of the pot.
• Preferred.  BlastOne provides the Tera Valve as standard equipment on all new blast equipment.  In addition, we use them in our own rental fleet.

• Supplied with HF GMRL gasket fitted
• For HFSTC, HFATC, HFBTC – use HF CLP-1 thin type lock pins – not included
• HFBTC can also be fitted with optional urethane high-pressure gasket
• HFPTC is supplied with HF GPCG3 gasket fitted and contains an integral springlock pin
• Standard claw, standard bore coupling – compatible with other standard couplings
• Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2

• Dual Wheeled Trailer Mounted abrasive blasting equipment
• BMS6.5 blast machine with Thompson Valve outlet
• 400 cfm AirPrep Air Drier
• 375 cfm 150 psi diesel air compressor
• Breathing air filter
• Carbon monoxide alarm
• Tool box
• Hose rack
• Room for 1 skid of abrasive
• Dustless Vapor Blasting

MOBILE DUST COLLECTOR FOR ABRASIVE BLASTING PROJECTS

• Available to Buy or Hire
• Ready availability all over Australia
• Diesel Powered, Optional to include Electric
• Come either Trailer Mounted or Skid Mounted
• Industry Leading Design
• Read our Dust Collector Buying Guide
• Used for Dust control while Sandblasting
• Most common sizes: 6,000cfm, 12,000cfm, 20,000cfm or 40,000cfm
• Portable dust extractor for site work
• Onsite Dust Collectors & Onsite Dust Ventilation
• Industrial Portable Dust Collectors

• Single Lipped MRL Rubber, Compatible: Mega Max Couplings, 1-¾ (45mm) Bore Size, Pack 10
• Have Large Bore for maximum efficiency

• Conventional bleeder-type deadman control handle
• 1/4″ (6mm) (supply) x 1/8″ (3mm) (return) threaded connectors
• Large lever design
• Use only with equipment designed for bleeder-style handles – DO NOT use with Combo or Thompson Valves

• The most versatile, easy-to-regulate dry blast machine on the market
• 10-150psi blasting pressure range
• With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate “metering” of hard-to-flow abrasives like Soda and fine Garnets
• With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types – fine to coarse
• With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
• G2 pneumatic deadman control, 55′ twinline control hose, 55′ water line with wet blast attachment for dust suppression included with purchase
• Genuine Products – Manufactured by Axxiom Manufacturing – Schmidt®

AVAILABLE FOR RENTAL OR PURCHASE

• Suits RPB Nova 2000 and Nova 3 Blast Helmet Set ups
• Breathing air hose to be used with the Nova Helmets
• Certified Breathing Air Hose with non-toxic liner
• Complies with Australian Standards
• 3/8″ (10 mm) ID bore.
• Fitted with approved breathing airline CEJN quick connect fittings

• Surelock Coupling Gaskets
• Surelock Coupling Gaskets – Pack: 10

• Suits Combo Valve Blast Machines
• Blowdown Hose is used as part of the blast pot exhaust valve
• When the deadman is triggered, the combovalve pinches off the blowdown hose, and lets the pot pressurize
• Sold by the metre

• Filters breathing air to remove oils, odors, moisture, dust
• Does not remove CO, you need an additional monitor for that.
• Can be either floor or wall mounted, uses the same bracket
• Lightweight, site rugged, cast aluminum construction
• Filter only has 4 bolts to remove to change the filter every 3 months which saves you time
• Filter Sold with
  • RPB Radex Filter 04-900
  • Quick connect outlet fitting
  • Inlet air hose connector

• Tungsten Carbide Plunger for Thompson Valve 2
• Replacement Tungsten Carbide Plunger for Thompson Valve 2
• 2152-000-07 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Cylinder for Thompson Valve 2
• Replacement Cylinder for Thompson Valve 2
• 2152-000-09 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-18
• Replacement Spring Retainer O-Ring for Thompson Valve 2

• ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
• This System changes the depressurization flow of the air in the blast hose
• Allows a 60 metre blast hose to depressurize in less than 1 second
• Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
• Saves Seconds – Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
• Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• 12 Volt Electric Deadman Controls
• Contains all deadman control components in a neat weather-proof box
• Comes with 5 metre battery cable with alligator clips
• Comes with response electric deadman handle, 20 metre deadman cable and TwistLok plug connectors
• A must have for blasting contractors working a long distance from their blast pot or sand blast hopper

Have a good pot that you hate to throw away?   The TeraValve™ Complete Blast Pot Retrofit Kit allows you to obtain state-of-the-art pressure-hold abrasive metering technology and save money in the process!  Details as follows:

• Your existing pot must be structurally sound and must have at least 150mm clearance below it.
• The retrofit kit includes a new TeraValve™ as well as all other valves, piping, deadman handle/controls, and hoses required for a complete upgrade.  
  • Note:  Handway and pop-up components are available separately, if needed.  In addition, you may want to consider the optional VBS II muffler and/or a union-end ball valve / quick connect (if you have the necessary clearance).  See Related Products below.
• Retrofit kits are available in either pneumatic or electric and are offered in both 32mm and 38mm valve sizes.
• Installation instructions are included in the box (and under the Documents tab here).  If installation assistance is needed, call us for friendly tech support via phone or we can arrange to have our technicians perform the installation for you.

• Repair Kit for MicroValve
• Replacement Repair Kit for MicroValve III
• Schmidt abrasive blasting equipment/ Axxiom Manufacturing part number 2127-100-99
• Complete Rebuild Kit for MicroValve 2 Schmidt / Axxiom part # 2127-100-99 Includes: GV214950006, GV212700005, GV701100506, GV212700012, GV212700015, and GV212710008

The field repairable NLB8488 can significantly improve UHP system productivity. It uses a quick-change cartridge valve that is similar to NLB 286 series lances and foot controls. User-friendly features include:

• 60-second cartridge replacement
• Switch from 1-lance to 2-lance operation with a simple nozzle change
• Rounded frame for easier carrying

Hose assembly is required to connect a rotating lance to a Bi-Mode valve.

Note: This Bi-Mode Valve has been reconditioned and includes a 90 day warranty.

• 3-pin Quick connector
• ‘TwistLok’ action designed to prevent cables from accidentally disconnecting
• Panel mount available DM ECK100
• 3-Pin / 3-Prong Twistlok are most commonly used for deadman cable
• 2-Pin / 3-Prong Twistlok commonly used for Electric Power Supply
• Sold Individually

• 3600 psi / 250 bar water pressure
• 15 litres per minute (lpm)
• Hot Water up to 90 degrees Celsius
• Skid Mounted for easy transportation
• Silenced Package for noise reduction
• Comes complete with 20m of hose and a high pressure lance

• Pneumatic lift with three dimensional movement capability.
• Used in a paint booths of up to 6 metres Wide x 7.9 metres High
• Wall mounted, with adequate floor clearance for hoses etc.
• CE, CAS, and UL certified, ATEX compliant
• Operator controls the console from the platform
• Extra air outlet for tools inside the basket

• For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
• Material: Double-lipped rubber
• Compatibility:
  • PCG-1: 3/4″ ID and Smaller Blast Hose
  • PCG-2: 1″ ID Blast Hose
  • PCG-3: 1-1/4″ ID and Larger Blast Hose
• Sold as a pack of 10

• Suits Manual Blow Down Blast Pots – Thompson Valve or Tera Valve Style
• Complete Conversion Kit to reduce sound to 110 dB
• Handles any abrasive that may be escaping out of the blast pot
• Sold as a Field Assembly Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Goes on blast pot leg)
  • Blowdown Hose Assembly
  • Ball Valve and required fittings
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt

BlastOne UBD24M-50C HP Water Blast unit rated for operation at up to 350 bar/5,000 psi, 21 LPM. Includes the following features:

• Kohler 24HP Diesel Engine
• Hawk HP Triplex Pump
• Heavy duty Hose Reel
• Stainless Water Header Tank with low level shut down
• Heavy duty industrial water filter assembly
• Large Fuel Tank
• HP 400 Bar Cleaning Gun and Lance with fan nozzle
• 20M HP Hose Assembly

• Suits Pressure Release blowdown systems like the Combo/Micro Blast Pot
• Sound levels are quieted to 110 dB (at 100 psi)
• Safely reduces abrasive particles that can escape during blowdown
• Sold as a Field Assembly Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Attaches to Combo Valve)
  • Any required fittings
  • Does not include a new Blow Down hose
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt